Switching between speaker systems
Switch to the 3 way speaker system following the
procedure below.
!
• Be sure to set the speaker network correctly.
Connecting 3 way speakers with the 2 way mode
selected can break the speakers.
1
Press the <HOME> button twice to the
Source launcher panel.
2
Touch [
] in the Source launcher
panel.
3
Touch [STANDBY].
4
Press the <∞> button and <0> button
for 1 second at the same time.
Speaker system select screen appears.
DNR8035BT/
DNR8035BTM
5
Touch [3way].
A confirmation screen appears.
6
✎
• When the 3-way speaker system is selected,
the following functions are disabled. (See the
Instruction Manual.)
- Zone Control (P.128)
- DSP select (P.124)
- Fader of Controlling General Audio (P.124)
• For speaker setup and crossover setup, see Setting
Audio (P.120) in the Instruction Manual.
HOME
6
Touch [Yes].
The 2 way speaker system is switched to the 3 way
speaker system.
NOTE
27
English ñ