Audio Right = red).
B
Select the input source by using the
on the remote control or on the TV.
C
Select your desired channel with the remote control
for cable box.
HDMI input
How To Connect
Connect the cables from the external equipment's
output jacks to the TV input jacks, as shown in the figure.
How To Use
A
Select the input source by using
the remote control or on the TV.
B
Operate the corresponding external equipment.
Refer to external equipment operating guide.
Operation
In the manual, the OSD (on screen display) may be
different from your TV's, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in
order for your TV to work properly. Read the instructions
that follow.
Switching On/Off the TV set
A
First, connect power cord correctly.
B
Select the viewing source by using
the remote control.
Downloaded from
www.Manualslib.com
VIDEO
L -AUDIO- R
L
R
INPUT button on
INPUT button on
manuals search engine
C
When finished using the TV, press
the remote control. The TV reverts to standby mode.
INPUT button
D
If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
Note
ANT IN
If the TV in power on , the screen show information
according the type of input signal, the information
will disappear. If there is no signal, "No Signal" will
display on the screen.
Choose the Menu Language
When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
A
Choose
B
Press
CH+/- button to select Function menu.
C
Press
button to select Language.
D
Press
VOL+/- button to select language.
( English, Spanish or French)
Choose the Input source
Change the picture source so you can watch your
TV, VCR, DVD, Cable , or any other devices that are
connected to your TV.
A
Press
INPUT button to enter the Select Source menu
and then use CH+/- button to select the desired
items (TV, composite, Component, PC, HDMI).
B
Press
ENTER button to confirm .
POWER button on
TV Input and then press MENU button.
VOL+ or ENTER button and then use CH+/-
Language
English
Video
OSD Timeout
Short
OSD Transparency
Middle
Audio
DPMS
On
Channel
Blue Screen
On
DCR
On
Time Setup
Function
Closed Caption
Lock
Default
CH+/-
Function
Select
EXIT
Back
VOL+/-
Haier LED HDTV
Operation
EN-10