E N G L I S H HEAVY DUTY ROTARY HAMMER DEILL D25112(K)/D25113K/D25114K/D25213K Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users. Technical data D25112(K) D25113K...
E N G L I S H 3 K eep c hildren away D25112(K ) D25113K (sound pressure) dB(A)* 90.5 90.5 Do not allow children, visitors or animals to come (acoustic power) dB(A) near the work area or to touch the tool or the mains cable.
E N G L I S H Package contents The tool will do the job better and safer at the rate for which it was intended. Do not force the tool. The package contains: Warning! The use of any accessory or attachment 1 Heavy duty rotary hammer drill or performance of any operation with this tool 1 Side handle...
E N G L I S H Your D WALT tool is double insulated in Hammer drilling: for concrete and accordance with EN 50144; therefore no masonry drilling operations. earth wire is required. D25113K/D25114K/D25213K (fig. B2) Using an extension cable The tool can be used in the following operating modes: If an extension cable is required, use an approved extension cable suitable for the power input of this...
Page 10
E N G L I S H We recommend to use professional accessories only. • Push the forward/reverse slider (3) to the RH-side • Clean and grease the bit shank. for reverse (LH) rotation. • Insert the bit shank into the tool holder (6). •...
Page 11
E N G L I S H Be aware of the location of pipework and wiring. Drilling with a core bit Apply only a gentle pressure to the tool (approx. 5 kg). • Set the mode selector (3) to the “hammer drilling” Excessive force does not speed up drilling but position.
E N G L I S H • Insert the appropriate screwdriver bit. When driving slotted head screws always use bits with a finder sleeve. Lubrication • Gently press the variable speed switch (1) to Your power tool requires no additional lubrication. prevent damage to the screw head.