Page 1
17453-1 Wireless Motion Sensing LED Spotlight User’s Manual...
Page 3
Unit turns on for the time set by the switch ( 30 sec. or 2 min.) then turns off if no motion is detected. Light Sensor - The LED Spotlight only turns on in the dark - to conserve battery life. Brightness Settings - 1.
Page 4
4. Replace battery compartment - put back in the spotlight compartment. Screw on till the arrows match. Mounting the LED Spotlight: Determine which mounting method you need 1. Permanent mounting - Large screw mounting a. Remove base by removing screw in the side of the base.
Page 5
2. Hanging Keyhole Type Mounting NOTE: FOR BEST PERFORMANCE, SPOTLIGHT SHOULD BE POSITIONED SO MOTION SENSOR IS ON TOP AND LIGHT IS ON BOTTOM. First, use included template to mark the area where the screws will be inserted. NOTE: Spotlight can be rotated 360°, so screws can be mounted in any position.
DO NOT OVER TIGHTEN. Positioning The Fixture: The LED Spotlight can be rotated 360 degrees, up or down. To adjust the light up or down; turn winged screw (see photo) counter clockwise,...
Page 8
17453-1 1/19/10 is a trademark of the General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114. This Jasco product comes with a 1 year limited warranty. Visit www.jascoproducts.com for details. PRECAUCIÓN CAUTION •...