Epson EB-Z8050W User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. EB-Z8050W
  6. User manual
Epson EB-Z8050W User Manual

Epson EB-Z8050W User Manual

Multimedia projector
Hide thumbs Also See for EB-Z8050W:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
User's Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson EB-Z8050W

Summary of Contents for Epson EB-Z8050W

  • Page 1 User’s Guide...

  • Page 2: Notations Used In This Guide

    Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

  • Page 3: Table Of Contents

    Changing methods......... . . 25 Network Menu (EB-Z8050W only)........54 Changing the Aspect for video equipment images.
  • Page 4 Appendix Projection Distance of EB-Z8050W........104 Connecting a LAN Cable........105 Installation Methods.
  • Page 5 Input signal from the HDMI/DVI-D input port......116 Supported Monitor Displays for EB-Z8050W......117 Computer signals (analog RGB).

  • Page 6: Introduction

    Introduction This chapter explains the projector's features and the part names.

  • Page 7: Projector Features

    Projector Features Horizontal and vertical installation possible Ease of use when installed on a ceiling mount The projector can be pointed either up or down to project images on the ceiling or Centered lens floor. This makes it an effective The lens is positioned in the center of the communication tool that lets you express projector so it is well balanced and is easy...

  • Page 8: Reliablity You Can Depend On

    Easy to handle Epson Cinema Filter supports the color gamut for digital cinema. Select Theatre or sRGB in Color Mode to use Epson Cinema Filter for 100% reproduc- Direct power On/Off tion of the color gamut used for digital cinema. As a result, this reproduces colors In places where power is managed centrally, such as in a conference room, the projec- that are full and deep.
  • Page 9 Projector Features efficient and varied presentations and meetings. Projector Operation Guide Connect to the projector from computers via a network You can use your existing network to share the projector from multiple computers. Documents can be projected from each computer without having to change any ca- bles during meetings or presentations.

  • Page 10: Part Names And Functions

    Part Names and Functions Name Function Front/Top The Security slot is compatible with the Microsaver Security slot( ) The illustration shows the projector with a standard zoom lens installed. Security System manufactured by Kensington. p.41 Takes in air to cool the projector internally. If dust Air intake vent collects here it can cause the internal temperature to (Air filter)

  • Page 11: Interface

    Connects to the optional wireless LAN unit. Wireless LAN Unit port (EB-Z8050W only) Outputs to an external monitor the analog signal from Monitor Out port the computer connected to the Computer input port or the BNC input port.

  • Page 12: Rear

    Rear Status indicators The color of the indicators and whether they are flashing or lit indicate the status of the projector. The left illustration indicates EB-Z8050W. EB-Z8000WU has no Wireless indicator. s p.71 Corrects horizontal Keystone distortion. If pressed while [</ ][>/ ] button...

  • Page 13: Remote Control

    Part Names and Functions Name Function Remote Control [t] button Turns the projector power On or Off. s Quick Start Guide...
  • Page 14 Part Names and Functions Name Function Name Function [t] button Turns the projector power On or Off. s Quick Start [Lens Shift] button Press to adjust the lens shift. s Quick Start Guide Guide Press to set the remote control ID. s p.34 [ID] button Changes to images from the Computer input port.
  • Page 15 Test Pattern is assigned as the default setting. [LAN] button Changes to images of EasyMP Network Projection. (EB-Z8050W only) s p.22 This button does not function when using EB-Z8000WU. ID switch Use this switch to enable (On)/disable (Off) ID settings for the remote control.

  • Page 16: Useful Functions

    Useful Functions This chapter explains useful tips for giving presentations, and the Security functions.

  • Page 17: Correcting Distortion In The Projected Image

    Correcting Distortion in the Projected Image There are two methods of correcting distortion in projected images as Because Quick Corner and H/V-Keystone correction can be carried out below. while projecting a test pattern, you do not need to make preparations by connecting a computer or other equipment.

  • Page 18: Correcting Distortion With Quick Corner

    Correcting Distortion in the Projected Image Correcting Distortion with Quick Corner Procedure Press the [Menu] button, and then from the configuration menu select Settings - Keystone. "Using the Configuration Menu" Using the Remote Control Using the Control panel Use the [ ] button on the remote control or the [ ], [ ], [...
  • Page 19 Correcting Distortion in the Projected Image Repeat procedures 3 and 4 as needed to adjust any To adjust the shape, use the [ ] button on the remote remaining corners. control or the [ ], [ ], [ / ], and [ / ] buttons on <...
  • Page 20 Correcting Distortion in the Projected Image If the [Esc] button is held down for about two seconds while correcting with Quick Corner, the following screen is displayed. Reset Quick Corner: Resets the result of Quick Corner corrections. Switch to H/V-Keystone: Switches the correction method to H/ p.48 V-Keystone.

  • Page 21: Changing The Projected Image

    You can change the projected image in the following two ways. HDMI • Changing by Source Search LAN (EB-Z8050W only): The images projected using EasyMP Network Projection from a computer connected to the projector The projector automatically detects signals being input from connected via a network.

  • Page 22: Switch To The Target Image By Remote Control

    If no operation is performed after about 10 seconds, the Remote Control screen closes. LAN is displayed on the screen only when using EB-Z8050W. Changes to images from the Computer input port. Changes to images from the Video input port.

  • Page 23: Functions For Enhancing Projection

    The images are vivid and brought to life. sRGB Ideal for images that conform to the sRGB color standard. Select Customized to adjust R,G,B,C,M,Y from Customized Color Adjustment in the configuration menu. The Epson Cinema Filter deploys automatically when Theatre or sRGB is selected.

  • Page 24: Setting The Auto Iris

    Functions for Enhancing Projection Setting the Auto Iris By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy deep and rich images. Procedure Procedure Press the [Menu] button, and select Image - Auto Iris from the configuration menu.

  • Page 25: Changing The Aspect Ratio

    Functions for Enhancing Projection a still photo. Also, you can perform operations such as changing Changing the Aspect Ratio between files during presentations from a computer without projecting any images if the freeze function is activated beforehand. Change the Aspect Ratio when video equipment is connected so that images that have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format.
  • Page 26 Functions for Enhancing Projection Normal 16:9 Full Zoom Native...

  • Page 27: Changing The Aspect For Computer Images

    Functions for Enhancing Projection Changing the Aspect for computer images You can change the aspect of projected images input from the Computer, BNC, DVI-D, or HDMI input port as follows. The original aspect ratio is 16:10 because of the wide panel mounted on the projector. When projecting onto 16:9 screens, set the Aspect to 16:9. Set Values Operation Projection example...
  • Page 28 Functions for Enhancing Projection Set Values Operation Projection example Full Project at full size. When a 1024x768 signal is input Zoom Projects the input image enlarged to the When a 1024x768 signal is input full lateral direction size as the aspect ratio remains.
  • Page 29 Functions for Enhancing Projection Set Values Operation Projection example Native Projects at the resolution of the input When an 800x600 signal is input When a 2048x1536 signal is input image size to the center of the screen. This is ideal for projecting clear images. If the image resolution exceeds the panel resolution of your projector, the edges of the image are not projected.

  • Page 30: Pointer Function (Pointer)

    Functions for Enhancing Projection Move the Pointer icon ( Pointer Function (Pointer) Remote Control This allows you to move a Pointer icon on the projected image, and helps you draw attention to the area you are talking about. You can choose from three different kinds of Pointer icon ( Procedure , or ) in Settings - Pointer Shape from the configuration...

  • Page 31: Enlarging Part Of The Image (E-Zoom)

    Functions for Enhancing Projection Move the ( ) to the area of the image that you want to Enlarging Part of the Image (E-Zoom) enlarge. This is useful when you want to expand images to see them in greater Remote Control detail, such as graphs and tables.

  • Page 32: Limitation Of The Number Of The Target Projectors When Using Multiple Projectors

    Limitation of the Number of the Target Projectors when Using Multiple Projectors When an ID is set for the projector and the remote control, you can Opera- Combinations Descriptions use the remote control to operate only the projector with a matching tion ID.

  • Page 33: Setting The Projector Id

    Limitation of the Number of the Target Projectors when Using Multiple Projectors Setting the Projector ID Checking the Projector ID Use the following procedure to check the projector ID. Procedure Procedure During projection, press the [Menu] button and select Extended - "Projector ID" from the configuration menu. Set the remote control ID switch to On.

  • Page 34: Setting The Remote Control Id

    Limitation of the Number of the Target Projectors when Using Multiple Projectors Setting the Remote Control ID The remote control ID setting is saved in the remote control. Even if the remote control batteries are removed to replace them and so on, the stored ID setting is retained.

  • Page 35: Correcting Color For Multiple Projectors

    Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment) When multiple projectors are lined up and projecting images, you can Correction Method manually correct the brightness and color tone of each projector's image so that the colors projected from each projector match closely. After setting up the projectors, correct the brightness and tone for each projector to reduce the differences.
  • Page 36 Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment) image, you can check the correction results and make corrections in the actual image. Repeat procedures 3 to 5 until corrections are finished. When all corrections are finished, press the [Menu] button to close the configuration menu.

  • Page 37: Security Functions

    Security Functions The projector has the following enhanced security functions. 2. User's Logo Protect Even if someone tries to change the User's Logo set by the owner of the • Password Protect projector, it cannot be changed. When User's User's Logo Protect is set to On, You can limit who can use the projector.

  • Page 38: Entering The Password

    Security Functions Remote Control • If Password Protect is already activated, you must enter the Password. If the Password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" • When the Password is set, stick the Password protect sticker in a visible position on the projector as a further theft deterrent.

  • Page 39: Restricting Button Operation

    Password thirty times in succession, the following message is displayed and the projector does not accept any more Password entries. "The projector's operation will be locked." Contact Epson as described in your Procedure documentation. Epson Projector Contact List During projection, press the [Menu] button and select Settings - Control Panel Lock from the configuration menu.

  • Page 40: Lens Operation Lock

    Security Functions Lens Operation Lock This function locks the following buttons on the remote control related to the lens operation. Remote Control Select either Full Lock or Partial Lock according to your purpose. Procedure Press the [Menu] button, and select Settings - "Lens Operation Lock"...

  • Page 41: Anti-Theft Lock

    Security Functions Anti-Theft Lock As the projector is often setup on ceiling mounts and left in rooms unattended, the projector includes the following security devices to prevent someone from taking the projector. • Security slot The Security slot is compatible with the Microsaver Security System manufactured by Kensington.

  • Page 42: Configuration Menu

    Configuration Menu This chapter explains how to use the configuration menu and its functions.

  • Page 43: Using The Configuration Menu

    Using the Configuration Menu Selecting from the top menu Selecting from the sub menu Changing the selected item Exit...

  • Page 44: List Of Functions

    List of Functions Image Menu Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each image signal. Analog RGB/Digital RGB Analog/Digital Component Video Composite video /S-Video Sub Menu...
  • Page 45 List of Functions Sub Menu Function Color Adjustment (This item cannot be selected if sRGB is selected as the Color Mode setting from the Image menu.) You can make adjustments by choosing one of the following. Red, Green, Blue: You can adjust the saturation of each color individually. (This item cannot be displayed if Customized is selected as the Color Mode setting from the Image Menu.) R, G, B, C, M, Y: You can adjust the hue, saturation, and brightness of each color R (red), G (green), B (blue), C (cyan), M (magenta), Y (yellow) individually.

  • Page 46: Signal Menu

    List of Functions Signal Menu Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each image signal. Analog RGB Digital RGB/ Analog Component Video Composite video /S-Video Digital Component Video...
  • Page 47 List of Functions Sub Menu Function Noise Reduction (This cannot be set when a digital RGB signal is input) Smoothes out rough images. There are two modes. Select your favorite setting. It is recommended that this is set to Off when viewing image sources in which noise is very low, such as for DVDs.

  • Page 48: Settings Menu

    List of Functions Settings Menu Sub Menu Function You can correct keystone distortion. Keystone H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone. Use the [w/ ], [v/ ], [</ ], and [>/ ] buttons on the control panel to perform similar corrections to V-Keystone and H-Keystone. Quick Corner: Selects and corrects the four corners of the projected image.

  • Page 49: Extended Menu

    List of Functions Sub Menu Function Test Pattern When the projector is setup, a Test Pattern is displayed so that you can adjust the projection without connecting other equipment. While the Test Pattern is displayed, zoom, focus adjustments, and Keystone correction can be performed. To cancel the Test Pattern, press the [ESC] button on the Remote Control or the Control panel.
  • Page 50 Set this item to Normal to use the remote control provided with the projector. When Simple is selected, you can use the remote control provided with other Epson projectors to operate this projector (except for EB-G5350/G5200W/G5100). This is useful if you want to use a remote control that you are already familiar with to operate the projector.

  • Page 51: Network Menu (Eb-Z8000Wu Only)

    List of Functions Sub Menu Function Language You can set the Language for message displays. You can reset Display , Operation , and Air Filter Notice from the Extended menu to their default settings. Reset To return all menu items to their default settings, see s p.68 *1 When User's Logo Protect is set to On in Password Protect, settings relating to User's Logo cannot be changed.
  • Page 52 List of Functions Sub Menu Function Wired LAN You can make network settings. DHCP: You can set whether or not (On/Off) to use DHCP. If this is set to On you cannot set any more addresses. IP Address: You can input the IP address assigned to the projector. You can enter a number from 0 to 255 in each field of the address.
  • Page 53 List of Functions Sub Menu Function Mail When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent email, s "Reading Problem Mail Notification Function" p.110 Mail Notification: You can set whether or not (On/Off) to be notified by e-mail.

  • Page 54: Network Menu (Eb-Z8050W Only)

    List of Functions Network Menu (EB-Z8050W only) When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after setting Network Protect to Off. p.37 Sub Menu Function The following menus are available for setting network items.

  • Page 55: Notes On Operating The Network Menu

    List of Functions Notes on operating the network menu Selecting from the top menu and sub menus, and changing of selected items are the same as operations in the configuration menu. When done, make sure you go to the Setup complete, and select one of Yes, No, or Cancel. When you select Yes or No, you return to the configuration menu.

  • Page 56: Basic Menu

    List of Functions Each time this key is selected, it sets and changes between upper case and lower case letters. Each time this key is selected, it sets and changes the symbol keys for the section enclosed by the frame. Basic Menu Sub Menu Function...

  • Page 57: Wireless Lan Menu (Only When The Optional Wireless Lan Unit Is Installed)

    List of Functions Sub Menu Function Web Control Password Set a password to use when making settings and controlling the projector using Web Control. You can enter up to 8 single-byte alphanumeric characters. Web control is a computer function that allows you to set up and control the projector by using the Web browser on a computer connected on a network.
  • Page 58 List of Functions Sub Menu Function DHCP You can set whether or not (On/Off) to use DHCP If this is set to On you cannot set any more addresses. You can input the IP address assigned to the projector. IP Address You can input a number from 0 to 255 in each field of the address.

  • Page 59: Security Menu (Only Available When The Optional Wireless Lan Unit Is Installed)

    List of Functions Security menu (Only available when the optional wireless LAN unit is installed) When the optional wireless LAN unit is installed and being used in Manual Mode, it is strongly recommended that you set security. Sub Menu Function Select one of the following security methods.
  • Page 60 List of Functions System Authentication PEAP/EAP-GTC User name, Password LEAP User name, Password EAP-Fast/MS-CHAPv2 User name, Password EAP-Fast/GTC User name, Password • If using EAP, you need to make settings at the projector that match the authentication server settings. Check with your network administrator for details on RADIUS settings.
  • Page 61 List of Functions Sub Menu Function Format You can set the input method for the WEP encrypted key. ASCII: Input text. The method of inputting the encrypted WEP with text differs depending on the access point. Check with the network administrator for the network in which the projector participates, and then set to "ASCII".
  • Page 62 List of Functions The following items can be set. Sub Menu Function You can enter a Pre-Shared Key (encrypted key) in single-byte alphanumeric characters. Enter at least 8 and up to 63 characters. When the Pre- PSK (Encryption key) Shared Key is entered and the [Enter] button is pressed, the value is set and displayed as an asterisk (*). You cannot enter more than 32 characters on the configuration menu.

  • Page 63: Wired Lan Menu

    List of Functions Wired LAN Menu Sub Menu Function DHCP You can set whether or not (On/Off) to use DHCP If this is set to On you cannot set any more addresses. You can input the IP address assigned to the projector. IP Address You can input a number from 0 to 255 in each field of the address.

  • Page 64: Mail Menu

    List of Functions Mail Menu When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent e-mail, p.110 Sub Menu Function You can set whether or not (On/Off) to be notified by e-mail. Mail Notification SMTP Server You can input the IP address...

  • Page 65: Others Menu

    List of Functions Others Menu Sub Menu Function You can register up to two for the SNMP trap notification destination. Trap IP Address 1/Trap IP Address 2 You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.

  • Page 66: Reset Menu

    List of Functions Reset Menu Resets all of the network settings. Sub Menu Function To reset all of the network settings, select Yes. Reset network settings. After you reset all the settings, the Basic menu appears.

  • Page 67: Info Menu (Display Only)

    List of Functions Info Menu (Display Only) Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image signal being projected as shown in the following screen shots. Analog RGB/Digital RGB/ Composite video /S-Video...

  • Page 68: Reset Menu

    List of Functions Sub Menu Function Serial Number Displays the projector's serial number. The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H", "11H", and so on. Reset Menu Sub Menu Function You can reset all items in the configuration menu to their default settings.

  • Page 69: Troubleshooting

    Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.

  • Page 70: Using The Help

    Using the Help If a problem occurs with the projector, the Help screen is displayed to Confirm the selection. assist you by pressing the [Help] button. You can solve problems by Remote Control answering the questions. Procedure Press the [Help] button. The Help screen is displayed.

  • Page 71: Problem Solving

    Warm-up time is about 30 seconds. After warm-up is complete, the indicator stops flashing. [t] button does not function during warm-up. Projecting Indicates the operating status of wireless LAN when the optional wireless LAN unit is connected. (EB-Z8050W only) Indicates the air filter status. Indicates the internal temperature status.

  • Page 72: Indicator Is Lit Or Flashing Red

    Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide. s Epson Projector Contact List Fan Error Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide.s...

  • Page 73: M O N Indicator Is Flashing Or Lit

    If the error continues after checking the points above, stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide. Epson Projector Contact List Auto Iris Error Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide.
  • Page 74 Support and Service Guide. s Epson Projector Contact List If it is cracked: Replace it with a new lamp, or contact your local dealer for further advice. (Only one lamp is working.

  • Page 75: When The Indicators Provide No Help

    Problem Solving Other problems When the Indicators Provide No Help • "The Remote Control does not If any of the following problems occur and the indicators do not offer work" p.81 a solution, refer to the pages given for each problem. •...

  • Page 76: Problems Relating To Images

    Problem Solving Problems relating to images No images appear Check Remedy Did you press the [t] button? Press the [t] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally. Connect the projector's power cable correctly.
  • Page 77 Problem Solving The message "Not supported" is displayed. Check Remedy Is the image signal format setting correct? Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal p.46 Only when projecting images from a video source Do the image signal Resolution and the Refresh Rate correspond Refer to the computer's documentation for how to change the image signal Resolution and the Refresh Rate output to the mode?
  • Page 78 Problem Solving Check Remedy Has condensation formed on the lens? If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy.
  • Page 79 Problem Solving Check Remedy Is the computer set for dual display? If dual display is activated in the "Display Properties" of the computer's Control panel, only about half of the image on the computer screen is projected. To display the entire image on the computer screen, turn off the dual display Only when projecting computer images setting.

  • Page 80: Problems When Projection Starts

    Support and Service Guide. s Epson Projector Contact List Is the Control Panel Lock set to Full Lock? Press the [t] button on the Remote Control.

  • Page 81: Other Problems

    Problem Solving Other problems The Remote Control does not work Check Remedy Is the remote control light-emitting area pointing towards the Point the remote control towards the Remote Receiver. remote receiver on the projector when it is operated? Operating range s Quick Start Guide Is the remote control too far from the projector? The operating range for the remote control is about 15 m.
  • Page 82 If the abnormal state continues, contact your local dealer or the nearest address provided in the Support and Service Guide. s Epson Projector Contact List Is power being supplied to the projector? Check that your electrical outlet or power source is functioning correctly.

  • Page 83: Appendix

    Appendix This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.

  • Page 84: Installation Methods

    Contact your dealer or the nearest address provided in the Support and • Project images from in front of • Project images from behind a Service Guide if you want to use this installation method. Epson a screen. translucent screen. Projector Contact List •...

  • Page 85: Cleaning

    Cleaning You should clean the projector if it becomes dirty or if the quality of Cleaning the Air filter projected images starts to deteriorate. Clean the air filter and the air intake vent when the following message Warning is displayed or the Filter indicator is flashing green. "Time to clean the air filter."...
  • Page 86 Cleaning Attention Remove the air filter. If the air filter is hit too hard, it may become unusable due to deformities and cracks. Remove any dust remaining on the air filter by using a vacuum cleaner from the front side. With the front (the side with tabs) of the air filter facing down, tap the air filter four or five times to shake off the dust.
  • Page 87 Cleaning Replace the air filter cover. Press the cover until it clicks into place. If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s p.92...

  • Page 88: Replacing Consumables

    Replacing Consumables This section explains how to replace the Remote Control batteries, the lamp, and the air filter. Replacing the Remote Control Batteries If delays in the responsiveness of the Remote Control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat.

  • Page 89: Replacing The Lamp

    Replacing Consumables • The projected image gets darker or starts to deteriorate. Replacing the Lamp Attention Lamp replacement period • The lamp replacement message is set to appear after the following time periods in order to maintain the initial brightness and quality of the It is time to replace the lamp when: projected images.
  • Page 90 If the lamp is still hot, burns or other injuries may result. It takes your local dealer for further advice. Epson Projector Contact about one hour after the power has been turned off for the lamp to be cool List enough.

  • Page 91: Resetting The Lamp Hours

    Replacing Consumables Attention • Make sure you install the lamp securely. If the lamp cover is removed, the lamp turns off automatically as a safety precaution. If the lamp or the lamp cover is not installed correctly, the lamp does not turn on. •...

  • Page 92: Replacing The Air Filter

    Replacing Consumables Replacing the Air Filter Air filter replacement period It is time to replace the air filter when: • The air filter has turned brown. • The message is displayed even though the air filter has been cleaned. How to replace the air filter The air filter can be replaced even when the projector is suspended from a ceiling.
  • Page 93 Replacing Consumables Replace the air filter cover. Press until it clicks into place. Dispose of used air filters properly in accordance with your local regulations. Material of the frame part: Polypropylene Material of the filter part: Polypropylene...

  • Page 94: Optional Accessories And Consumables

    Support and Service Guide if you want to use this installation method. control, or to operate page Up/Down while projecting a PowerPoint file. Epson Projector Contact List Wireless LAN unit ELPAP03 (for EB-Z8050W) Use this to project images from a computer via a wireless LAN.

  • Page 95: Consumables

    Optional Accessories and Consumables Consumables Replacement lamp unit (two-pack) ELPLP52 Replacement lamp unit (one-pack) ELPLP51 Use as a replacement for used lamps. Air filter ELPAF23 Use as a replacement for used air filters.

  • Page 96: Notes On Transportation

    Notes on Transportation There are many glass parts and precision components inside the Notes when packing and transporting projector. To prevent damage due to impacts when transporting, handle Enclose the projector securely in buffer material to protect it from the projector as follows. shock, and place it into a strong cardboard container.

  • Page 97: Saving A User's Logo

    Saving a User's Logo You can save the image that is currently being projected as a User's Logo. • If User's Logo Protect from Password Protect is set to On, a message is displayed and the user's logo cannot be changed. You When a User's Logo is saved, the previous User's Logo is erased.
  • Page 98 Saving a User's Logo Move the box to select the part of the image to use as the Select the zoom factor from the zoom setting screen. User's Logo. 400% is displayed only when using EB-Z8000WU. When the message "Save this image as the User's Logo?" is displayed, select "Yes".

  • Page 99: Making A Wps (Wi-Fi Protected Setup) Connection With A Wireless Lan Access Point (Eb-Z8050W Only)

    Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-Z8050W only) There are two methods for setting WPS. From "Wireless LAN" select "To Setup Wizard". • Push Button Method SSID and security are set automatically when the [Enter] button is pressed on the projector's control panel and the dedicated button on the access point equipment.
  • Page 100 Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-Z8050W only) The Push Button Method screen is displayed. This completes the setup. Press the [Enter] button on the projector's control panel Press the [Enter] button or the [Esc] button.

  • Page 101: Making A Connection Using The Pin Code Method

    Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-Z8050W only) The PIN Code Method screen is displayed. This completes the setup of the connection between the projector and the access point. Press the [Menu] button to close the Enter the PIN code displayed on the "PIN Code Method"...
  • Page 102 Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-Z8050W only) The message "Setup by Wi-Fi Protected Setup complete." is This completes the setup of the connection between the projector displayed. Press the [Enter] button or the [Esc] button.

  • Page 103: Screen Size And Projection Distance

    Screen Size and Projection Distance The following table shows the projection distance when a standard zoom lens is attached. When an optional lens is attached, check the projection distances in the User's Guide supplied with optional lenses. Minimum (Wide) to Maxi- Vertical lens shift Screen Size mum (Tele)

  • Page 104: Projection Distance Of Eb-Z8050W

    -42 - 191 150" 330x190 571 - 925 -52 - 239 200" 440x250 764 - 1236 -69 - 318 Projection Distance of EB-Z8050W 300" 660x370 1150 - 1859 -104 - 477 485" 1070x600 1869 - 3016 -168 - 773 Units: cm...

  • Page 105: Connecting A Lan Cable

    Connecting a LAN Cable Connect with a commercially available 100BASE-TX or 10BASE-T LAN cable. The interface may differ from the following illustration depending on the model of your projector. (The following illustration indicates EB-Z8000WU) To LAN port LAN cable (commercially available) To LAN port Attention To prevent malfunctions, use a category 5 shielded LAN cable.

  • Page 106: Connecting To An External Monitor

    Connecting to an external monitor Analog RGB images input from Computer Input Port or BNC Input Port can be displayed on an external monitor and the screen at the same time. This means that you can check projected images on an external monitor when giving presentations even if you cannot see the screen.

  • Page 107: Removing And Attaching The Projector Lens Unit

    Removing and Attaching the Projector Lens Unit Prepare #2 plus-driver in advance. Remove the front cover. Removing Attention • Only remove the lens unit when necessary. If dust or dirt enter the projector, projection quality deteriorates and it could cause a malfunction. •...

  • Page 108: Attaching

    Removing and Attaching the Projector Lens Unit Pull the lens unit straight out as it is released. While holding the lens unit firmly, turn the lock lever clockwise until it is locked. Check that the lens cannot be Attaching detached. Attention Do not attach the lens unit when the projector's lens insertion section is facing up.
  • Page 109 Removing and Attaching the Projector Lens Unit Install the cover along the guide. Tighten the fixing screws. Attention Replace the front cover. • Install the front cover to use the projector. • Store the projector with the lens unit installed. If the projector is stored without the lens unit, dust and dirt may get inside the projector and cause malfunctions or lower the quality of projection.

  • Page 110: Reading Problem Mail Notification Function

    Cause warning occurs in the projector, the following e-mail is sent. Low Air Flow Low Air Flow Subject: EPSON Projector Low Air Flow Error Filter Airflow Error Line 1: The name of the projector where the problem has occurred No Air Filter No Air Filter/Air Flow Sensor Err.

  • Page 111: Esc/Vp21 Commands

    ESC/VP21 Commands Command List Cable Layouts When the power ON command is transmitted to the projector, the Serial Connection power turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned. •...

  • Page 112: Communications Protocol

    ESC/VP21 Commands Communications protocol • Default baud rate setting: 9600 bps • Data length: 8 bit • Parity: None • Stop-bit: 1 bit • Flow control: None...

  • Page 113: About Pjlink

    INPT 11 INPT 13 Video INPT 23 S-Video INPT 22 DVI-D INPT 31 HDMI INPT 32 • Manufacturer name displayed for "Manufacture name information query" EPSON • Model name displayed for "Product name information query" EB-Z8050W/PowerLite Pro Z8050W EB-Z8000WU/PowerLite Pro Z8000WU...

  • Page 114: Supported Monitor Displays

    Supported Monitor Displays Supported Monitor Displays for EB-Z8000WU Computer signals (analog RGB) Units: dots Signal Refresh Rate (Hz) Resolution Aspect Mode Normal 16:9 Full Zoom Native 60/72/75/85/iMac 640x480 1600x1200 1920x1080 1920x1200 1920x1200 640x480 SVGA 56/60/72/75/85/iMac 800x600 1600x1200 1920x1080 1920x1200 1920x1200 800x600 60/70/75/85/iMac 1024x768...

  • Page 115: Component Video

    Supported Monitor Displays Signal Refresh Rate (Hz) Resolution Aspect Mode Normal 16:9 Full Zoom Native MAC21” 1152x870 1588x1200 1920x1080 1920x1200 1920x1200 1152x870 *1 Connection is disabled if the equipment does not have a VGA output port. *2 Only compatible when Normal is selected as the Resolution from the configuration menu. *3 Only compatible when VESA CVT-RB(Reduced Blanking) signal is input.

  • Page 116: Input Signal From The Hdmi/Dvi-D Input Port

    Supported Monitor Displays Input signal from the HDMI/DVI-D input port Units: dots Signal Refresh Rate (Hz) Resolution Aspect Mode 16:9 Full Zoom Native 640x480 1920x1080 1920x1200 1920x1200 640x480 SVGA 800x600 1920x1080 1920x1200 1920x1200 800x600 1024x768 1920x1080 1920x1200 1920x1200 1024x768 WXGA 1280x800 1920x1080 1920x1200...

  • Page 117: Supported Monitor Displays For Eb-Z8050W

    Supported Monitor Displays Supported Monitor Displays for EB-Z8050W Computer signals (analog RGB) Units: dots Signal Refresh Rate (Hz) Resolution Aspect Mode Normal 16:9 Full Zoom Native VGAEGA 640x350 1280x700 1280x720 1280x800 1280x700 640x350 60/72/75/85/iMac 640x480 1066x800 1280x720 1280x800 1280x800 640x480...

  • Page 118: Component Video

    Supported Monitor Displays Signal Refresh Rate (Hz) Resolution Aspect Mode Normal 16:9 Full Zoom Native MAC21” 1152x870 1059x800 1280x720 1280x800 1280x800 1152x800 *1 Connection is disabled if the equipment does not have a VGA output port. *2 Only compatible when Normal is selected as the Resolution from the configuration menu. *3 Only compatible when VESA CVT-RB(Reduced Blanking) signal is input.

  • Page 119: Input Signal From The Hdmi/Dvi-D Input Port

    Supported Monitor Displays Input signal from the HDMI/DVI-D input port Units: dots Signal Refresh Rate (Hz) Resolution Aspect Mode 16:9 Full Zoom Native 640x480 1280x720 1280x800 1280x800 640x480 SVGA 800x600 1280x720 1280x800 1280x800 800x600 1024x768 1280x720 1280x800 1280x800 1024x768 WXGA 1280x800 1280x720 1280x800...

  • Page 120: Specifications

    Specifications Projector General Specifications Product name EB-Z8050W EB-Z8000WU Dimensions 534 (W) ^ 167 (H) ^ 734 (D) mm (not including raised section) Panel size 0.95" Wide 0.94" Wide Display method Polysilicon TFT active matrix 1,024,000 pixels 2,304,000 pixels Resolution WXGA (1280 (W) ^ 800 (H) dots) ^ 3...

  • Page 121: Connectors

    Specifications Connectors Mini D-Sub15-pin (female) blue Computer Input Port 5BNC (female) BNC Input Port HDMI HDCP compatible, CEC signal incompatible HDMI Input Port DVI-D 24pin Single Link HDCP compatible DVI-D Input Port 1BNC (female) Video input port Mini DIN 4-pin S-Video input port Mini D-Sub15-pin (female) black Monitor Out port...

  • Page 122: Operating Conditions For The Software

    Specifications Operating Conditions for the Software The software supplied with the projector runs on computers that meet the following requirements. EasyMP Network Projection EasyMP Monitor Windows 2000 SP4/XP/XP SP1/XP SP2/XP SP3/Vista/Vista SP1 Windows 98 Second Edition SP1/Windows Me/Windows NT4.0 SP6/Windows 2000 Professional SP4/ Windows XP Home Edition Mac OS X 10.3 or later SP2 or later/Windows XP Professional SP2 or later/Windows Recommended: Mac OS X 10.5.1 or later, 10.4.11/10.3.9...
  • Page 123 Class B digital device, pursuant to Part 15 of the FCC Rules. Personal Computers These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment Epson America, Inc. generates, uses, and can radiate radio frequency energy and, if not Located at: 3840 Kilroy Airport Way...

  • Page 124: Appearance

    Appearance Center of lens Distance from center of lens to suspension bracket fixing point Units: mm...

  • Page 125: Glossary

    AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment. AMX Device Discovery Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON). See the AMX Web site for more details.
  • Page 126 Glossary A method of image scanning whereby the image data from a single image is scanned sequentially from top to bottom to create a single image. Progressive The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be Refresh Rate scanned many times per second to refresh the light-emitting element.

  • Page 127: General Notes

    Seiko Windows Vista and the Windows logo are trademarks of the Microsoft Corporation Epson Corporation. No patent liability is assumed with respect to the use of the and affiliated companies.

  • Page 128: Index

    Index indicator ............ 71 Customized ........... 23 HDMI input port ......... 11 Help function ..........70 High Altitude Mode ........50 How to replace the air filter ......92 Abs. Color Temp......... 44 DHCP ............52 How to replace the lamp ......89 Address 1/2/3 settings .........
  • Page 129 Index Menu Size ............. 49 Presentation ..........23 Shutter Timer ..........50 Messages ............49 Problem Solving ........... 71 Signal Menu ..........46 Monitor Displays ........114 Progressive ............ 46 Sleep Mode ........... 50 Monitor Out port ........ 11, 106 Projection ............
  • Page 130 Index Video input port .......... 11 Video Signal ........... 47, 67 Web Control Password ....... 52 Wide-screen projection ......25 Wired LAN ........... 52 Zoom ............. 14...

This manual is also suitable for:

Eb-z8000wu

Table of Contents