Page 2
Manual Overview D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change.
Windows 7 ..........................................4 Windows Vista .........................................6 Windows XP ..........................................7 Mac OS X ..........................................10 Linux 2.6.14 ........................................... 13 Connecting the Adapter to a Network ................................14 Completing the Installation ....................................15 Troubleshooting ......................................16 Technical Specifications ..................................18 D-Link DUB-E100 User Manual...
Section 1 - Product Overview Package Contents • DUB-E100 USB 2.0 10/100 Fast Ethernet Adapter • DUB-E100 Drivers and Manual on CD-ROM • Quick Installation Guide If any of the above items are missing or damaged, please contact your reseller.
Microsoft Windows 7/Vista/XP/2000, Mac OS X, or Linux. Based on USB 2.0, the DUB-E100 extends the transfer speed of earlier USB Fast Ethernet adapters to true 10/100 Mbps connectivity. Power for the DUB-E100 is provided directly by the USB bus, eliminating the need for an external power adapter.
Section 1 - Product Overview Hardware Overview USB Connector Ethernet Port COMPONENT DESCRIPTION Ethernet Port Plug an Ethernet cable from a switch, hub, or router into this port. USB Connector Plug this connector into a USB port on your PC. D-Link DUB-E100 User Manual...
Section 2 - Installation Software Installation Insert the DUB-E100 CD into your computer’s DVD or CD drive, then proceed to the appropriate installation section on the following pages for your operating system. Note: If the user interface does not start up, please go to the Autorun folder in your PC’s CD drive and open Autorun manually.
Page 8
Section 2 - Installation When the InstallShield Wizard is completed, plug the DUB-E100 into your PC and the driver software installation will be completed automatically. When the Windows 7 driver installation is complete, please then proceed to Connecting the Adapter to a Network on page 14.
Section 2 - Installation Windows Vista After you put the CD into the CD drive, the DUB-E100 user interface menu screen will appear. Click on Install to begin the DUB-E100 driver installation. The InstallShield Wizard will then pop up. Note: The DUB-E100 user interface may differ in appearance for different regions.
Section 2 - Installation Windows XP After you put the CD into the CD drive, the DUB-E100 user interface menu screen will appear. Click on Install to begin the DUB-E100 driver installation. The InstallShield Wizard will then pop up. Note: The DUB-E100 user interface may differ in appearance for different regions.
Page 11
Section 2 - Installation The Found New Hardware box will appear. Select Yes, this time only and click Next to continue. Choose Install the software automatically and click Next to continue. D-Link DUB-E100 User Manual...
Page 12
Section 2 - Installation When the Windows XP driver installation is complete, you can connect the DUB-E100 to a USB port on your computer. Please then proceed to Connecting the Adapter to a Network on page 14. D-Link DUB-E100 User Manual...
The following screenshots were taken from Mac OS X 10.5, but the steps are similar in other versions of OS X. Your operating system must be version 10.4 or above. Please insert the DUB-E100 CD into your computer’s DVD or CD drive, then go to the DUB-E100 folder and navigate to \Drivers\MAC.
Page 14
Section 2 - Installation Click Continue. Click Install to perform a standard installation. If you wish to change the drive where the installation will take place, click Change Install Location. D-Link DUB-E100 User Manual...
Page 15
Enter the name and password of a user with administrative rights. Click OK. Click Continue Installation. The computer will then restart itself after the installation is complete. Please then proceed to Connecting the Adapter to a Network on page 14. D-Link DUB-E100 User Manual...
[root@localhost linux2.6.14_rev101]# insmod asix.ko [root@localhost anywhere]# modprobe asix To unmount the driver, just typing the following command: [root@localhost anywhere]# rmmod asix [root@localhost anywhere]# rmmod usbnet Please then proceed to Connecting the Adapter to a Network on page 14. D-Link DUB-E100 User Manual...
Section 2 - Installation Connecting the Adapter to a Network Attach an Ethernet cable to the Ethernet port on the DUB-E100. Attach the other end of the Ethernet cable to your network switch, hub, or router. D-Link DUB-E100 User Manual...
Completing the Installation When the installation of the DUB-E100 is complete, the Speed LED will illuminate solid green when the DUB-E100 is connected to a 100 Mbps network and remains off when connected to a 10 Mbps network. The Tx/Rx LED will flash amber when data is being transmitted or received.
• Right-click on the My Computer icon and select Properties. • The D-Link USB DUB-E100 should appear with a green and gold network adapter symbol. If the D-Link USB DUB-E100 in Device Manager appears with a bright yellow exclamation mark or a red x, please contact D-Link Technical Support.
Page 20
Then you should get the reply similar to the following lines: asix 26880 0 usbnet 20616 1 asix 9600 2 asix,e100 usbcore 114896 5 asix,usbnet,usb_storage,echi_hcd,uhci_hcd If you still have a problem installing the D-Link DUB-E100 USB driver, please contact D-Link Technical Support. D-Link DUB-E100 User Manual...
+ 73 x 21.3 x 20 mm (2.87 x 0.84 x 0.79 inches) Hardware Specifications WEIGHT + 22 g (0.05 pounds) PACKAGE CONTENTS + DUB-E100 USB 2.0 Fast Ethernet Adapter OPERATING TEMPERATURE + Quick Installation Guide + Operating: 0 ˚ to 40 ˚C (32 ˚ to 104 ˚F) + CD-ROM with: + Storage: -10 ˚...