Deleting Selected Files ............56 Table of Contents Protecting Files ..............57 Protecting/Releasing Protection of the Currently Displayed File .................. 57 Getting Started Protecting/Releasing Protection of Selected Files ....58 Verifying the Accessories ............3 Capturing a Still Image in the Video During Playback .... 59 Turning on this Unit ..............
Getting Started Verifying the Accessories If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center. Illustration Description AC Adapter AC-V11U Charges this unit. Attach the charging adapter cable to the tip of the cord.
Getting Started Turning on this Unit Open the LCD monitor to turn on this unit. To turn off the power, close the LCD monitor. To turn on the power Open the LCD monitor. To turn off the power Close the LCD monitor. The POWER/ACCESS lamp goes off and the power is turned off.
(when the provided AC adapter is used) When the recording time becomes extremely short even when the battery is fully charged, the battery needs to be replaced. For details on replacing the built-in battery (subject to a fee), consult the nearest JVC service center. Caution : There are certain specifications for a USB rechargeable device.
Getting Started Resetting this Unit Quad Proof When a malfunction occurs on this unit, reset the unit in the following way. This unit is equipped with Waterproof, Dust-proof, Drop-proof and Freeze- proof features. Open the terminal cover. Remove the power cord and all connecting cables. Close the LCD monitor to turn off this unit.
Stop using the unit underwater if there are damages to the cover, etc. camera in fresh water for about 10 minutes to remove salt particles, and consult your JVC dealer or the nearest service center. replace the water and rinse the camera.
Getting Started Grip Adjustment Attaching the Core Filter (for Optional AV Cable) Attach a core filter to the AV cable that is connected to this unit. The core filter reduces interference when this unit is connected to other devices. A Open the pad B Adjust the length of the belt C Close the pad Caution :...
Getting Started Inserting an SD Card Removing the Card Push the SD card inward once, then pull it out straight. When a commercially available SD card is inserted, recordings can still be made to the card without stopping when the remaining recording time on the built-in memory runs out.
Getting Started Memo : Using the Touch Screen Using SD cards (including SDHC/SDXC cards) other than those specified above may result in recording failure or data loss. The LCD monitor of this unit is a touch panel which enables operations by This unit is not guaranteed to operate with all SD cards.
Getting Started Adjusting the Touch Panel Tap “OK”. Adjusts the response position of the buttons on the touch screen. Tap “MENU”. Setting ends and returns to the menu screen. Caution : Do not tap areas other than the “+” mark during touch screen adjustment Tap “SETUP”.
Getting Started Names of Buttons and Functions on the LCD Monitor Playback Screen (Video) The following screens are displayed during the A video and B still image modes, and operate as touch screens. Recording Screen (Video/Still Image) When this unit is not operated, the operation buttons on the LCD monitor disappear automatically.
Page 13
Getting Started Playback Screen (Still Image) Index Screen (Thumbnail Display) Display When this unit is not operated, the operation buttons on the LCD monitor A/B (Video/Still Image) Mode Button disappear automatically. Tap on the screen to display the operation Switches between A video and B still image modes. buttons again.
Page 14
Getting Started Menu screen (recording mode) Menu screen (playback mode) RECORD SETTING Menu PLAYBACK SETTING Menu “RECORD SETTING Menu (video)” (A p. 82) “PLAYBACK SETTING Menu (video)” (A p. 90) “RECORD SETTING Menu (still image)” (A p. 87) “PLAYBACK SETTING Menu (still image)” (A p. 92) Shortcut Menu CONNECTION SETTINGS Menu “Operating the Shortcut Menu”...
Getting Started Clock Setting Resetting the Clock Set the clock with “DATE & TIME” from the menu. The “SET DATE/TIME!” screen appears when you turn on this unit for the Tap “MENU”. first time after purchase, when it has not been used for a long time, or when the clock is not set yet.
Getting Started Changing the Display Language The language on the display can be changed. Tap “MENU”. Time difference between the selected city and the GMT (Greenwich Mean Time) is displayed. Tap 0 or 1 to select the city name. Tap “SETUP”. Tap “LANGUAGE”.
Getting Started Holding this Unit Tripod Mounting When holding this unit, keep your elbows close to your sides to prevent This unit can be mounted on a tripod (or monopod). This is useful for camera shake. preventing camera shake and recording from the fixed position. To prevent this unit from falling off, check the tripod mounting screw holes and positioning holes on the unit carefully before mounting, and turn the screws until they are fastened firmly.
Getting Started Using this Unit Overseas Setting the Clock to Local Time when Traveling Change the date and time display to the local time by selecting your travel The shape of the power outlet varies according to countries and regions. destination in “AREA SETTING”...
Getting Started Setting Daylight Saving Time Optional Accessories When “ON” is selected in “DST SETTING” of “DATE & TIME”, the time is set 1 hour ahead. Product Name Description Tap “MENU”. HDMI Mini Cable Allows viewing in high picture quality when VX-HD310 connected to a TV.
Recording Taking Videos in Auto Mode Indications for Video Recording You can record without worrying about the setting details by using the P Intelligent Auto mode. Settings such as exposure and focus will be adjusted automatically to suit the shooting conditions. In case of specific shooting scenes such as person etc., its icon is displayed on the screen.
Page 21
Recording Scenes of Intelligent Auto Operation Buttons for Video Recording Display Icon Description Captures one’s skin beautifully. Allows people to be captured naturally. Record a group of people with the most suitable settings. Records while focusing on a near object. Focuses at a far distance and captures a sharp image with vivid colors.
Please be forewarned. When the Silent mode is used, the LCD monitor darkens and operation - JVC will not be responsible for any lost data. sounds will not be output. Use this mode to record quietly in dark places such - In order for quality improvement, defective recording medium is subject as during a performance.
Recording Taking Still Images in Auto Mode Indications During Still Image Recording You can record without worrying about the setting details by using the P Intelligent Auto mode. Open the LCD monitor. Some displays disappear after approximately 3 seconds. Use the n button to change the displays. Display Icon Description A Image Size...
Page 24
Recording Scenes of Intelligent Auto Operation Buttons for Still Image Recording Display Icon Description Captures one’s skin beautifully. Allows people to be captured naturally. Record a group of people with the most suitable settings. Records while focusing on a near object. Focuses at a far distance and captures a sharp image with vivid colors.
Recording Using the Silent Mode Zooming When the Silent mode is used, the LCD monitor darkens and operation The angle of view can be adjusted using zoom. sounds will not be output. Use this mode to record quietly in dark places such as during a performance.
Recording Manual Recording You can adjust settings, such as brightness, by using the manual mode. Manual recording can be set for both video and still image modes. Open the LCD monitor. For details on the various manual settings, refer to “Manual Recording Menu”.
Recording Adjusting Focus Manually (FOCUS) Adjust the focus. Set this when the focus is not clear in Intelligent Auto or when manual focusing is desired. Select the Manual recording mode. Tap E to focus on a distant subject. If E appears blinking, focus cannot be set any further. Tap p to focus on a near subject.
Recording Adjusting Brightness Tap “MANUAL”. You can adjust the brightness to your preferred level. Select the Manual recording mode. Adjust the brightness value. If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual.
Recording Setting Backlight Compensation Tap “ON” or “ADVANCE”. You can correct the image when the subject appears too dark due to backlight. Select the Manual recording mode. “ADVANCE” is designed to perform more effective backlight compensation. Choose this when the backlight compensation is not adjusted appropriately by “ON”.
Recording Setting White Balance Select the white balance setting. You can set the color tone to suit the light source. Select the Manual recording mode. You can either tap the icon, or select the item using the “0” “1” button and tap “SET”.
Recording Taking Close-up Shots (TELE MACRO) Tap “TELE MACRO”. You can take close-up shots of an object using the tele macro function. *The image is only an impression. Tap L to exit the menu. Tap J to return to the previous screen. Select the Manual recording mode.
Recording Shooting under Water Locking the Screen Tap “MENU”. Perform the following settings to shoot underwater. Setting the White Balance to Underwater Mode Corrects the color when shooting underwater to record more natural images. Select from the following two settings depending on the color of the water at the shooting location.
Recording To cancel “SCREEN LOCK” Recording with Effects Tap the L button. You can add and record various effects to videos or still images. Once setting is done, you can easily record images that are suitable for each image. Type of Effect Description of Effect GRAINY Captures film-like monochrome images by...
Recording Recording Images Like an Old Black and White Photo Start recording. (GRAINY MONOCHROME) To cancel the setting, repeat the procedure from the beginning and You can record images with a grainy black and white photo feel. tap “OFF” in Step 5. *The image is only an impression.
Recording Recording Food Images (FOOD) Start recording. You can capture images of the food to make the food look appetizing. To cancel the setting, repeat the procedure from the beginning and *The image is only an impression. tap “OFF” in Step 5. Open the LCD monitor.
Recording Recording Images of a Baby (BABY) Start recording. You can capture soft images by enhancing the clarity and brightness of skin To cancel the setting, repeat the procedure from the beginning and color. This effect is suitable for capturing images of a baby. tap “OFF”...
Recording Capturing Subjects Clearly (TOUCH PRIORITY Tap the desired setting. AE/AF) “TOUCH PRIORITY AE/AF” is a function that adjusts focus and brightness based on a tapped position. This function is available for both videos and still images. Open the LCD monitor. Focus and brightness will be adjusted automatically based on the tapped position (face/color/area).
Recording Memo : Reducing Camera Shake When “TOUCH PRIORITY AE/AF” is set, “FOCUS” will be set to “AUTO” automatically. When the image stabilizer is set, camera shake during video recording can Tap the selected position (face/color/area) again to cancel the setting. be effectively reduced.
Recording Recording at Intervals (TIME-LAPSE Tap to select a recording interval (1 to 80 seconds). RECORDING) This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval.
Recording Time-Lapse Setting Taking Group Shots (Self-timer) The greater the number of seconds, the longer the recording interval. The 10-second self-timer is a convenient function for taking group photos. The 2-second self-timer is useful for preventing camera shake caused by Setting Details pressing the shutter button.
Recording Recording Videos with Date and Time Tap “SELF-TIMER”. You can record videos together with the date and time. Set this when you want to save the file with date and time display. (The date and time cannot be deleted after recording.) Open the LCD monitor.
Recording Checking the Remaining Recording Time Select the type of clock with 0 or 1, and tap “SET”. Display the remaining battery power and the remaining recording time. Memo : The remaining battery power and the remaining recording time are estimates.
Page 43
Recording time may differ depending on the shooting environment and usage. When the recording time becomes extremely short even when the battery is fully charged, the battery needs to be replaced. For details on replacing the built-in battery (subject to a fee), consult the nearest JVC service center.
Please be forewarned. PLAYBACK Plays back the playlists registered in Digest Playback. - JVC will not be responsible for any lost data. PLAYLIST Start playback from “PLAYBACK PLAYLIST” in the - In order for quality improvement, defective recording medium is subject “PLAYBACK SETTING”...
Playback Normal Playback Operation Buttons for Video Playback Plays back the recorded videos. During Index Screen Display Open the LCD monitor. Display Description A Video/Still Image Switches between video and still image Mode modes. Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen.
Page 46
Playback During Video Playback d MENU Displays the menu screen Memo : Tap or drag on the operation area of the touch screen. The recording date and time can be displayed on the screen during playback. (A p. 90) Adjusting the Volume of Videos You can use the zoom/volume lever to control the volume.
Playback Checking the Recording Date and Other Information You can see the recording information of the recorded videos. Open the LCD monitor. Tap A or B to select the video or still image mode. Tap M to select the playback mode. Tap on the file to start playback.
Playback DIGEST PLAYBACK You can play back a digest of recorded videos (Digest Playback). This is useful for checking the content of videos quickly. Open the LCD monitor. After selecting a date, tap “NEXT”. When “ALL” is tapped, Digest Playback will be performed for all the dates.
Playback PLAYBACK PLAYLIST Plays back the playlists registered in Digest Playback. Open the LCD monitor. Playback of the playlist starts. “Operation Buttons for Video Playback” (A p. 45) Tapping u during playback brings you back to the index screen of Playback Playlist.
Playback PLAYBACK OTHER FILE Tap on the file to start playback. The management information of a video may be damaged if recording is not performed correctly, such as turning off the power in the middle of recording. You can perform the following operations to play back the videos with defective management information.
Playback Playing Back Still Images Operation Buttons for Still Image Playback You can select and play back the recorded still images from an index screen During Index Screen Display (thumbnail display). Open the LCD monitor. Still images that are recorded continuously in high-speed or medium- speed will be grouped together.
Playback During Still Image Playback Slideshow Playback Still images can be played back in a slideshow. Tap I during still image playback to start the slideshow. When this unit is not operated, the operation buttons on the touch screen disappear automatically. Tap on the screen to display the operation “Operation Buttons for Still Image Playback”...
Playback Connecting to and Viewing on TV Connecting via the HDMI Mini Connector If you are using an HDTV, you can play back in HD quality by connecting to You can connect this unit to a TV for playback. The image quality on TV the HDMI mini connector.
Playback Memo : Operating in Conjunction with TV via HDMI Change the settings in “HDMI OUTPUT” according to the connection. Connecting this unit to an HDMI-CEC enabled TV using the HDMI mini cable “ HDMI OUTPUT ” (A p. 96) allows linked operations with the TV to be performed.
Playback To purchase, consult your nearest JVC service center. Connecting via the AV Connector To playback videos on TV, connect the AV cable (optional: QAM1322-001) to the AV terminal of this unit. Refer also to the instruction manual of the TV in use.
Editing Deleting Unwanted Files Deleting Selected Files Deletes the selected files. Delete unwanted videos and still images when the space in the recording Caution : media is running out. Deleted files cannot be restored. Doing so frees up more space in the recording media. “Deleting the Currently Displayed File”...
Editing Protecting Files Tap “SET”. Prevent important videos/still images from being deleted accidently by protecting them. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 57) “Protecting/Releasing Protection of Selected Files” (A p. 58) Caution : When the recording media is formatted, even the protected files will be deleted.
Editing Protecting/Releasing Protection of Selected Files Tap on the files to protect or release protection of. Protects or releases protection of the selected files. Open the LCD monitor. P appears on the selected files. To remove P from a file, tap on the file again. I and P are displayed on the files that are already protected.
Editing Captured still images are stored in the media where the video is being Capturing a Still Image in the Video During played back from. Playback You can capture still images of the scenes you like in the recorded videos. Open the LCD monitor.
Editing Combining Videos Recorded by Seamless Tap “COMBINE SCENES”. Recording Videos that are recorded on two separate media and with “SEAMLESS RECORDING” in the video recording menu enabled can be combined into a single video. “ SEAMLESS RECORDING ” (A p. 83) Open the LCD monitor.
Editing Capturing a Required Part in the Video Tap the video to edit. (TRIMMING) Select the required part of a video and save it as a new video file. The original video remains in its existing location. Open the LCD monitor. Tap e to pause playback at the desired start point, then tap “A”.
Editing Deleting Playlists Tap R. Delete the playlists that you have created. Open the LCD monitor. The DELETE screen appears. Tap on the playlist to delete, and tap “NEXT”. Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen.
Copying Operations are to be performed on the Blu-ray recorder after the Dubbing Files to a Disc by Connecting to a screen switches. Blu-ray Recorder Perform dubbing on the Blu-ray recorder. You can dub videos in the high definition quality by connecting an AVCHD- Refer also to the instruction manual of the Blu-ray recorder.
Wiring specifications (for video/audio) of the 4-pole mini plug are described Refer also to the instruction manuals of the TV and DVD recorder. in the following. To purchase, consult your nearest JVC service center. Open the terminal cover. Connect to a DVD recorder.
Wiring specifications (for video/audio) of the 4-pole mini plug are described Refer also to the instruction manuals of the TV and VCR. in the following. To purchase, consult your nearest JVC service center. Open the terminal cover. Connect to a VCR/DVD recorder.
Copying Copying Files to an SD Card Tap on the files to copy. You can copy videos and still images from the built-in memory to SD card. Copying still images to cards makes it convenient to bring them to the shop for printing (developing).
To create DVD-Video discs using the provided software, it is necessary to install the additional software (software for creating DVD-Video). For details, refer to the Pixela homepage. http://www.pixela.co.jp/oem/jvc/mediabrowser/e/ Backing up of files using other softwares is not supported. Trouble with Using the Provided Software Everio MediaBrowser 4 Consult the customer service center below.
Page 68
Copying If a “Computer” icon is shown on desktop, right-click the icon and select “Properties” in the menu to display your computer information. Windows Vista/Windows 7 Click the start button. Right-click Computer. Click “Properties”. Check the items with the table below.
Page 69
Copying Windows 8 Windows Vista/Windows 7 Windows 8 64-bit Windows Vista 32/64-bit Windows 8 or Windows 8 Pro Home Basic or Home Premium (Pre-installed versions, desktop mode only) (Pre-installed versions only) Service Pack 2 Windows8.1 64-bit Windows 7 32/64-bit Windows8.1 or Windows8.1 Pro Home Premium (Pre-installed versions, desktop mode only) (Pre-installed versions only) Service Pack 1...
Copying Installing the Provided Software (Built-in) You can display the recorded images in calendar format and perform editing using the provided software. This operation cannot be completed if the remaining battery power is not enough. Charge the battery fully first. Preparations Connect this unit to a computer with a USB cable.
Page 71
Copying “Everio Software Setup” appears on the computer. Operations are to be performed on the computer after the screen Click “Quit”. switches. Perform the following operations on your computer. A Click “Open folder to view files” on the auto play dialog box, and then double-click “install.exe”.
(English):+800-1532-4865 (toll-free) Other Countries in Europe (English):+44-1489-564-764 Asia (Philippines) (English): +63-2-438-0090 Homepage http://www.pixela.co.jp/oem/jvc/mediabrowser/e/ Delete unwanted videos before making backup. It takes time to back up many videos. “Deleting Unwanted Files” (A p. 56) Tap “BACK UP”. Disconnect the USB cable to return to the recording or playback screen.
Copying Disconnecting this Unit from Computer Organizing Files After backing up your files, organize them by adding labels such as “Family Trip” or “Athletic Meet”. This is useful not only for creating discs, but for viewing the files too. Double-click on the Everio MediaBrowser 4 icon. The provided software starts up.
(English):+44-1489-564-764 Asia (Philippines) (English): +63-2-438-0090 Select the files to copy to disc in order. Homepage http://www.pixela.co.jp/oem/jvc/mediabrowser/e/ Click “Settings” to select the disc type. Click “Select all” to select all the displayed files. After selecting, click “Next”. Set the title of the top menu of the disc.
Page 75
* To create DVD-Video discs using the provided software, it is necessary to install the additional software (software for creating DVD-Video). For details, refer to the Pixela homepage. http://www.pixela.co.jp/oem/jvc/mediabrowser/e/ Use commercially-available software to create a Blu-ray disc. Use Everio MediaBrowser 4 Player to play back an AVCHD disc. Refer to the help file of the provided Everio MediaBrowser 4 software to operate.
Copying Backing Up Files Without Using Provided Software (Windows 8) Right-click “Computer” in the “Windows System Tool” menu to select Copy the files to a computer using the following method. the checkbox, and then click the “JVCCAM_SD” icon. This operation cannot be completed if the remaining battery power is not (Windows 7/Windows Vista) enough.
Copying List of Files and Folders Folders and files are created in the built-in memory and SD card as shown below. They are created only when necessary. Caution : When the camera and PC are connected by an USB cable, recorded media are read-only.
Copying Copying to Mac Computer Load image file to iPhoto. iPhoto launches automatically and videos recorded in the camera are Copy the files to a Mac computer using the following method. displayed. Load the necessary images. Caution : Images on the built-in memory and SD card are displayed separately. Switch between JVCCAM_MEM (built-in memory) and JVCCAM-SD This operation cannot be completed if the remaining battery power is not (SD card) displayed under “Devices”...
Settings Menu Operating the Menu Operating the Top Menu You can configure various settings using the menu. There are two types of menus in this unit. Tap “MENU”. TOP MENU: Menu that contains all the items specific to the video recording, still image recording, video playback, and still image playback modes respectively.
Settings Menu Operating the Shortcut Menu You can configure various settings of the recommended functions in the video/still image recording mode using the shortcut menu. Tap “MENU”. Tap the shortcut icon (F). The shortcut menu appears. Tap the desired menu and setting. <Shortcut Menu During Video Recording Mode>...
Settings Menu Shortcut Menu (video/still image) BACKLIGHT COMP. Corrects the image when the subject appears dark due to backlight. “Setting Backlight Compensation” (A p. 29) *Displayed only in the manual recording mode.
Settings Menu RECORD SETTING Menu (video) FOCUS Focus can be adjusted manually. “Adjusting Focus Manually (FOCUS)” (A p. 27) *Displayed only in the manual recording mode. BRIGHTNESS ADJUST Adjusts the overall brightness of the screen. “Adjusting Brightness” (A p. 28) *Displayed only in the manual recording mode.
Page 83
Settings Menu GAIN UP Makes the subject appear bright automatically when recording in dark places. Setting Details Deactivates the function. Electrically brightens the scene when it is dark. AUTO SLOW-SHUTTER Slows down the shutter speed to brighten the scene when it is dark. Memo : Although “AUTO SLOW-SHUTTER”...
Page 84
Settings Menu VIDEO QUALITY Sets the video quality. Setting Details Enables recording in the best picture quality. Applies to Blu-ray discs only. Videos taken in high-definition quality cannot be saved to DVDs. Enables recording in high picture quality. Enables long recordings. Memo : Set to “UXP”...
Page 85
Settings Menu ZOOM MIC Sets the zoom microphone. Setting Details Deactivates the zoom microphone. Records audio sounds in the same direction as the zoom operation. Memo : When “ON” is selected, the volume of the wide angle (W) end is lower than the telephoto (T) end. MIC LEVEL Make the adjustments such that “MIC LEVEL”...
Settings Menu SPECIAL RECORDING Menu (video) TIME-LAPSE RECORDING This function enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval. This is useful for making observations such as the opening of a flower bud. “Recording at Intervals (TIME-LAPSE RECORDING)”...
Settings Menu RECORD SETTING Menu (still image) FOCUS Focus can be adjusted manually. “Adjusting Focus Manually (FOCUS)” (A p. 27) *Displayed only in the manual recording mode. BRIGHTNESS ADJUST Adjusts the overall brightness of the screen. “Adjusting Brightness” (A p. 28) *Displayed only in the manual recording mode.
Page 88
Settings Menu GAIN UP Makes the subject appear bright automatically when recording in dark places. Setting Details Deactivates the function. Electrically brightens the scene when it is dark. Memo : Setting can be adjusted separately for videos. “GAIN UP (Video)” (A p. 83) SHUTTER MODE Continuous shooting settings can be adjusted.
Settings Menu SPECIAL RECORDING Menu (still image) RECORDING EFFECT You can add and record various effects to the images. Once setting is done, you can easily record images that are suitable for each image. GRAINY MONOCHROME You can record images with a grainy black and white photo feel. “Recording Images Like an Old Black and White Photo (GRAINY MONOCHROME)”...
Settings Menu PLAYBACK SETTING Menu (video) DISPLAY DATE/TIME Sets whether to display the recording date and time during video playback. Setting Details Does not display the date and time during playback. Displays the date and time during playback. DIGEST PLAYBACK Plays back a digest of the recorded videos.
Settings Menu EDIT Menu (video) PROTECT/CANCEL Protects files from being deleted accidently. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 57) “Protecting/Releasing Protection of Selected Files” (A p. 58) COPY Copies files from the built-in memory to the SD card. “Copying Files to an SD Card”...
Settings Menu PLAYBACK SETTING Menu (still image) SLIDE SHOW EFFECTS Sets the transition effects in slideshow playback. Setting Details SLIDE Switches the screen by sliding in from right to left. BLINDS Switches the screen by dividing into vertical strips. CHECKERBOARD Switches the screen by changing through a checkered pattern.
Settings Menu EDIT Menu (still image) PROTECT/CANCEL Protects files from being deleted accidently. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 57) “Protecting/Releasing Protection of Selected Files” (A p. 58) COPY Copies files from the built-in memory to the SD card. “Copying Files to an SD Card”...
Settings Menu SETUP (video/still image) Mobile User Guide Displays the QR code to access the Mobile User Guide. The portal site appears when the QR code has been read correctly. Select the model name of your camera to display its Mobile User Guide. Memo : To read the QR code, a relevant application is required.
Page 95
Returns all the settings to their default values. FIRMWARE UPDATE Updates the functions of this unit to the latest version. For details, refer to the JVC homepage. (When no program to update the software of this unit is available, nothing will be provided on the homepage.) http://www3.jvckenwood.com/english/support/index.html OPEN SOURCE LICENSES (recording only) Displays the open source software licenses that are used in this unit.
Settings Menu CONNECTION SETTINGS (video/still image) DISPLAY ON TV Displays icons and date/time on a TV screen. Setting Details Does not display icons and date/time on TV. Displays icons and date/time on TV. VIDEO OUTPUT Sets the aspect ratio (16:9 or 4:3) according to the connecting TV. Setting Details Select this when connecting to a conventional TV (4:3).
Settings Menu MEDIA SETTINGS (video/still image) REC MEDIA FOR VIDEO Sets the recording/playback media of videos. Setting Details I BUILT-IN MEMORY Records videos to this unit's built-in memory. G SD CARD Records videos to the SD card. REC MEDIA FOR IMAGE Sets the recording/playback media of still images.
Settings Menu USB CONNECTION MENU This menu appears when this unit is connected to a computer using an USB cable. PLAYBACK ON PC Displays videos recorded by this unit by using the Everio MediaBrowser 4. “Installing the Provided Software (Built-in)” (A p. 70) Saves videos recorded by this unit on your computer without using the provided software.
Names of Parts Right Side Bottom Side D Speaker A Terminal Cover Lock E Grip Belt B Tripod Mounting Hole Pass your hand through the grip belt to hold this unit firmly. “Tripod Mounting” (A p. 17) “Grip Adjustment” (A p. 8)
Page 100
Names of Parts Top/Left/Rear Side Inside Terminal Cover A SD Card Slot Insert an optional SD card. B Reset Button A Light C HDMI mini connector Turn on the light when shooting in dark places. Connects to TV using an HDMI mini cable. B Stereo Microphone D AV Connector Do not cover the microphone with your fingers during video recording.
Names of Parts LCD Monitor A LCD Monitor Turns the power on/off by opening and closing. Enables self-portraits to be taken by rotating the monitor. “Using the Touch Screen” (A p. 10) “Names of Buttons and Functions on the LCD Monitor” (A p. 12) Caution : Do not press against the surface with force or subject it to strong impact.
Indications on the LCD monitor Common Recording Indications Video Recording A Video Mode A TOUCH PRIORITY AE/AF Switches between video and still image modes. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 37) B Video Quality B Backlight Compensation “ VIDEO QUALITY ” (A p. 84) “Setting Backlight Compensation”...
Indications on the LCD monitor Still Image Recording Video Playback A Video Mode Switches between video and still image modes. A Still Image Mode B Video Quality Switches between video and still image modes. “ VIDEO QUALITY ” (A p. 84) B Image Size C Operation Indicator “...
Troubleshooting Still Image Playback A Still Image Mode Switches between video and still image modes. B Folder Number C File Number D Date/Time Displays the recording date and time. E Recording media F Battery Indicator “Checking the Remaining Recording Time” (A p. 42) G SILENT MODE “Using the Silent Mode”...
Troubleshooting When the unit is not working properly Resetting this Unit Open the terminal cover. Remove the power cord and all connecting cables. Close the LCD monitor to turn off this unit. Press the Reset button gently using an object with pointed tip.
-10°C to 0°C, this will cause the remaining recording time to shorten. When the recording time becomes extremely short even when the battery is fully charged, the battery needs to be replaced. For details on replacing the built-in battery (subject to a fee), consult the nearest JVC service center.
Troubleshooting Recording SD Card Recording cannot be performed. Cannot insert the SD card. Check the A / B button. Make sure not to insert the SD card in the wrong direction. “Top/Left/Rear Side” (A p. 100) “Inserting an SD Card” (A p. 9) Set to the recording mode by tapping the E button on the screen.
Troubleshooting Playback Editing/Copying Sound or video is interrupted. Unable to delete file. Sometimes playback is interrupted at the connecting section between two Files (videos/still images) that are protected cannot be deleted. Release scenes. This is not a malfunction. protection before deleting the file. “Protecting Files”...
Troubleshooting Computer Screen/Image Unable to copy files to the computer’s HDD. The LCD monitor is difficult to see. If the provided software Everio MediaBrowser 4 is not installed, some The LCD monitor may be difficult to see if used in bright areas such as under functions may not work properly.
Please be forewarned. The buttons may not respond if you touch them with your fingernails or with - JVC will not be responsible for any lost data. Please be forewarned. gloves on. - In order for quality improvement, defective recording medium is subject to Disable “SCREEN LOCK”.
Troubleshooting Error Message? UNSUPPORTED FILE! Use files recorded with this unit. (Files recorded with other devices may not be playable.) SET DATE/TIME! The clock is reset about one month after the battery is depleted. Therefore, THIS FILE IS PROTECTED “SET DATE/TIME!” will appear the next time the power is turned on. Set the Switch off the “PROTECT/CANCEL”...
Maintenance Perform regular maintenance of this unit to enable it to be used for a long time. Caution : Be sure to detach the AC adapter and power plug before performing any maintenance. Camcorder Wipe this unit with a dry, soft cloth to remove any dirt. When it is extremely dirty, soak the cloth in a solution of neutral detergent, wipe the body with it, and then use a clean cloth to remove the detergent.
Digital zoom: Up to 200x Zoom (during still Optical zoom: Up to 40x image recording) LCD monitor 3.0", 230,000 pixels, color LCD Recording media Built-in memory (32 GB)(GZ-R70) Built-in memory (8 GB)(GZ-R30) SD/SDHC/SDXC card (commercially available) “Types of Usable SD Card” (A p. 9)
Specifications Still Image AC Adapter (AC-V11U) Item Details Item Details Recording format JPEG standard Power supply AC 110 V to 240 V, 50 Hz/60 Hz Extension .JPG Output DC 5.2 V, 1 A Image Size (16:9 aspect ratio) Allowable operating 0°C to 40°C (32°F to 104°F) (Recording pixel 1920 pixels x 1080 pixels (2M)
Trademarks Trademarks AVCHD and AVCHD logo are trademarks of Panasonic Corporation and Sony Corporation. HDMI (High-Definition Multimedia Interface) and HDMI logo are either registered trademarks or trademarks of HDMI Licensing, LLC in the United States and/or other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.