Main Board Removal
Main Board Removal
Remove the Right side decorative plastic piece by removing top and bottom screws.
Remove the remaining 6 screws that remove the "Shield" covering the Main Board.
Careful at this point, the Board will
Swing free of the supports.
Disconnect P902, P800, P901,
P900, P904, P401 and P500
Note: In the top right is a
Connector P200. This is an open
connection. (Software Upgrades)
Remove the 2 screws securing
the Side input decorative plastic
piece on the right.
Remove the 4 screws securing
the Main Board indicated below
in red.
LCD DV August 2008 32LG40
40