Copying Schedules To Another Day - Honeywell CHRONOTHERM T4700 Owner's Manual

Step Press This Key
1
2
3
4
NOTE: To exit the programming mode: 1) press and hold the Prog key for three seconds and
the display returns to Run mode, or 2) during the programming session, after five minutes
elapsed time with no program change, the display reverts to Run mode. This does not
change any of the programmed steps. Simply keep pressing the Prog key until you arrive
at the desired mode.
Table 4. Copying Schedules to Another Day.
Display Shows
Selects and displays the day to be
copied; for example, MOnday.
Displays COPY FROM day
(MOnday).
Displays COPY TO day (TUesday).
Enters the program.
(NOTE: Repeat sequence to copy
additional days.)
9
Description
69-1396—2