Table 1.13 Open_Reject Abandon Primitives - Fujitsu MAU3147RC SERIES Technical Manual

Serial attached scsi interface specifications
Hide thumbs Also See for MAU3147RC SERIES:
Table of Contents

Advertisement

Table 1.13 OPEN_REJECT abandon primitives

Primitive
OPEN_REJECT
(BAD DESTINATION)
OPEN_REJECT
(CONNECTION RATE NOT
SUPPORTED)
OPEN_REJECT
(PROTOCOL NOT
SUPPORTED)
OPEN_REJECT
(RESERVED ABANDON 0)
OPEN_REJECT
(RESERVED ABANDON 0)
OPEN_REJECT
(RESERVED ABANDON 0)
OPEN_REJECT
(RESERVED ABANDON 0)
OPEN_REJECT
(STP RESOURCES BUSY)
OPEN_REJECT
(WRONG DESTINATION)
All of the OPEN_REJECT versions defined in Table 1.14 shall result in the
originating device retrying the connection request.
C141-C009
Processing by the drive that receives the OPEN_REJECT
Issuer
Expander
Cancels the connection request, and aborts the TASK
phy
(command).
Any phy
1) When the physical link rate is 3.0 Gbps and the connection
link rate is 3.0 Gbps, the drive changes the connection rate to
1.5 Gbps, and resends the OPEN frame.
2) When the physical link rate is 3.0 Gbps and the connection
link rate is 1.5 Gbps, the drive changes the connection rate to
3.0 Gbps, and resends the OPEN frame.
3) When the physical link rate is 1.5 Gbps and the
connection link rate is 1.5 Gbps, the drive cancels
connection request, and aborts the TASK (command).
* After sending an OPEN frame in case 1) or 2), if the
drive receives this OPEN_REJECT primitive again, the
drive cancels the connection request, and aborts the
TASK (command).
If the driver receives this OPEN_REJECT primitive, it
Destination
cancels the connection request, and aborts the TASK
phy
(command).
Performs the same processing as the OPEN_REJECT
Unknown
(WRONG DESTINATION).
Performs the same processing as the OPEN_REJECT
Unknown
(WRONG DESTINATION).
Performs the same processing as the OPEN_REJECT
Unknown
(WRONG DESTINATION).
Performs the same processing as the OPEN_REJECT
Unknown
(WRONG DESTINATION).
Destination
Performs the same processing as the OPEN_REJECT
phy
(WRONG DESTINATION).
If the driver receives this OPEN_REJECT primitive, it
Destination
cancels the connection request, and aborts the TASK
phy
(command).
1.4 Link layer
primitive
1-31

Advertisement

Table of Contents
loading

Table of Contents