Technical Specifications - Bosch 700 Series Specifications

4 | 700 Series Hybrid/Network HD Recorder
1 Installation and operation manual
1 Divar 700 Series Archive Player operation manual

Technical specifications

Electrical
Rated Voltage and Power
Power input 100 to 240 VAC; 50/60 Hz
Power consumption Max. 2.5 to 1.0 A (250 Watt)
835 BTU/h
Able to withstand power dips up to 100 MS,
assuring continuous operation
Video
Video standard PAL or NTSC auto-detection
Resolution 704x576 PAL, 704x480 NTSC
Compression H.264
Inputs 8 or 16 composite video 0.5 to 2 Vpp, 75 ohm
automatic termination
Outputs 8 or 16 composite video 1 Vpp, 75 ohm, sync
0.3 V ± 10%
Audio
Inputs 8 or 16 line in (DHR models only), mono RCA,
1 Vpp, 10 kohm
Output 2 line out, dual mono RCA, 1 Vpp, 10 kohm
Compression MPEG-1 layer II
Sampling rate 24 kHz per channel
Monitors
MON-A Live, playback, menus
VGA: analog RGB 1280x1024, 60/75 Hz
(NTSC/PAL)
CVBS: 1 Vpp, 75 ohm, BNC
Y/C
MON-B (Hybrid Live
models only)
VGA: analog RGB 1024x768, 60/75 Hz
(NTSC/PAL)
CVBS: 1 Vpp, 75 ohm, BNC
Y/C
Display Modes
Monitor A Full, full sequence, quad, multi-screen (live
and playback), event call-up (live)
Monitor B (Hybrid Full, full sequence, quad, multi-screen, event
models only) call-up (live)
Frame rate PAL/ 25/30 IPS per channel (real time)
NTSC
Multi-screen mode 8 1, 2x2, 3x3 (showing 8 channels)
channels
Multi-screen mode 1, 2x2, 3x3, 4x4
16 channels
Zoom 1.5x, 2x, 3x, 5x
Display languages English, Chinese (Simplified), Czech, Danish,
Dutch, Finnish, French, German, Greek,
Hungarian, Italian, Japanese, Norwegian,
Polish, Portuguese, Russian, Spanish,
Swedish, Turkish.
Alarm Handling
Inputs Screw terminal, 8 or 16 inputs, configurable
NO/NC,
Max. input 40 VDC
Outputs Screw terminal 4 relay outputs, configurable
NO/NC, max. rated 30 VAC, 40 VDC, 0.5 A,
continuous -10 VA
Remote notification Via Control Center software
Malfunction relay Temperature related failures,
Voltage ratings, Disk failures
Connections
Ethernet 1 or 2 RJ45 modular jack, 8 pins shielded:
10/100/1000 Base-T
Biphase Screw terminal connector (5 outputs)
Maximum 5 controllable cameras per Biphase
output
Impedance 128 ohm, max. overvoltage
protection ±40 V, max. cable length 1.5 km
(0.9 miles)
Note: LTC 8785 translator needed for fixed-speed receivers/drivers
PTZ control interface RS485
Serial interface RS232 output signals according to EIA/
TIA-232 F, max. input voltage ±25 V
2xDB-9 male connector
Intuikey keyboard Conforms to RS485, max. signal voltage
(KBD Digital or ±12 V, power supply to keyboard 11 to
KBD Universal) 12.6 VDC at max. 400 mA
RJ11 modular jack 6 pins
USB Five USB 2.0 ports
10/100/1000 Base- Connect with Bosch iSCSI Video Storage
T network interfaces Arrays
(max 2)
Network
Bandwidth control 0.1-100 Mbps limiter