Panasonic DBS Caller ID Installation And Operation Manual page 10

Overview
The following illustration shows how a Caller ID call appears on the
phone display.
Figure 1-1. Example Caller ID display.
404-555-5512 First line: calling number (7 or 10 digits)
ABC COMPANY
Second line: calling name (up to 15 characters)
Flexible Display of Caller Information
With the introduction of Caller ID, the DBS provides a new timer that
controls how long incoming call information is displayed.
This new timer ensures that Caller ID information is displayed long
enough to provide ample viewing time without forcing the user to
start the call record too late.
Caller ID Call Log
The Call Log keeps a record of Caller ID calls to individual key
phones. Accessing the Call Log allows users to view Caller ID calls
that have been sent to their phone.
Users can assign an FF key to flash when there are new entries in the
log. When the user presses the key to access the log, the LED turns
off.
Caller ID via SMDR
Caller ID information is transmitted to the SMDR port. Incoming
Caller ID number and name is recorded in the dialed number field.
The call type is Incoming as indicated by an "I".
Caller ID Auto DISA
This feature provides automatic DISA dial tone based on Caller ID
information (not DISA trunk type). The purpose of the automatic
DISA dial tone is to provide easy access to the remote programming
mode through DISA.
1-4 Issued April 2000