Two-Way Transfer Button - Panasonic KX-TD500 User Manual

2.2

Two-Way Transfer Button

Allows you to assign a Flexible (CO, DSS) button as a Two-Way Transfer button.
This allows you to record a conversation into a desired mailbox.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO, DSS) button you wish
to assign as the Tow-Way
Transfer button.
<PT Display Example>
2WAY-TRANS
<PT Display Example>
2WAY-TRANS:xxxx
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the Station
Programming mode.)
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• You cannot enter a non-existent extension or floating directory number.*
• A voice mail extension number must be assigned by System Programming.
Programming References
• System Programming — Installation Manual, Section 4
4.1.4 Configuration - VPS(DPT) Port Assignment
* A Floating Directory Number (FDN) is a virtual extension number which appears to be an extension.
Refer to "Floating Station" in the Features Guide.
†: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports digital proprietary telephone integration; e.g. KX-TVS100).
Station Programming
(Assignment)
Voice Mail
9 1
extension no.
Dial 91. Enter the Voice Mail
extension number
(3 or 4 digits).
CLR
(-xxxx:VM extension number)
CLR
— Ext. No. 1, 2
†
AUTO DIAL
STORE
Press STORE.
• The STORE indicator lights.
• The display shows the initial
programming mode.
Station Programming
2-27