4
Connecting to the Ethernet
Ports
This chapter describes how to connect Ethernet network cabling to your
Nokia IP200 appliance.
Caution
To help guard against electrostatic discharge damage, make sure
you are properly grounded by using a grounding wrist strap and
following the instructions provided with the wrist strap before you
handle the components or open the appliance. If you do not have a
grounding wrist strap, make sure you are properly grounded before
you touch any electronic component.
Built-In Four-Port 10/100 Ethernet Interface
Every Nokia IP200 appliance has four built-in dual-mode 10-Mbps and
100-Mbps ports.
Nokia IP200 Series Security Platform Installation Guide
51