Filling The Condensate Trap With Water - Electrolux EN19WI30LS Installation Manual

Filling the condensate trap with water

The condensate trap can be filled before connecting the vent pipe.
Filling the condensate trap before vent pipe installation.
DANGER
Please follow one of the procedures described below to ensure that the condensate trap is filled with water.
of the appliance as illustrated below.
Or, if the vent pipe has already been installed:
window or a door if necessary.
Then, operate the unit and verify that condensate is coming out of the drain pipe.
(During normal use of the water heater, condensate will begin to discharge from the drain pipe within
If required by local code, the condensate must be neutralized prior to disposal into the sewer
system.
This is to prevent dangerous exhaust gases from entering the building.
30 oz.
850ml
Exhaust
11