Display - Panasonic CZ-64ESMC1U Operating Instructions Manual

Display

A: When the unit is in the heating standby mode, the
B: The currently selected operation mode is displayed.
C: The currently selected FAN SPEED, Airfl ow Direction and SWEEP settings are displayed.
D: This indication appears when the fi lter needs cleaning.
E: This indication appears only when an abnormality occurs within a unit.
F: The currently selected mode (ALL, ZONE or GROUP), ZONE number and GROUP number are
displayed.
G: The currently selected central control mode (1, 2, 3 or 4) is displayed.
H: Lights when any of the air conditioners under the system control is operating; turns off when none of
the air conditioners under the system control is operating. Blinks when any conditioner is operating
under abnormal conditions and its protection functionality is working.
I: When the
J: This indication appears when the temperature is set.
K: When turning on the power switch of the system controller.
blinking, any controls using the system controller are inhibited. This is because the system controller
is verifying connected groups.
Description
GROUP number display (no fi gure: no number registered)
GROUP state display ( [ ] registered group,
Operation state display ( on, no sign: off,
button is pressed for more than four seconds, the TEST indicator appears.
indicator appears.
currently selected group)
alarm)
sign blinks for a few minutes. While
EN
7