Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
5.2.5.1
Remote Support (by AIS Connect) Setup
When using the remote support function by AIS Connect, perform the environment settings for connecting to
the remote server (AIS Connect server) in the remote support center.
•
If the REMCS function is being used, temporarily stop the REMCS function.
•
In EMEA&I region, the "Log Transmission" setting for the "Set E-Mail Notification" function may be
enabled ("Yes" is displayed). If this setting is enabled, disable it (select "No").
Procedure
1
Start ETERNUS Web GUI.
2
On the navigation of ETERNUS Web GUI screen, click [System].
The [System] screen appears.
3
In [Category], click [AIS Connect] in [Remote Support].
The [Remote Support] screen appears.
4
Perform the environment settings for the AIS Connect function.
4-1
In [Action], click [Setup AIS Connect Environment].
The [Setup AIS Connect Environment] screen appears.
4-2
Select "Enable" for "AIS Connect" and then "Country code : Country name" for "Country of
Installation(Country Code : Country Name)". Perform the other additional settings that are required.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
135
Copyright 2013 FUJITSU LIMITED
P3AM-4832-07ENZ0