3.3. Ether-Direct Connection
Function overview
Ether-direct connection is a connection method that directly accesses the target port
of the product by specifying the TCP port number via a network terminal without
3
going through a terminal emulator, and then executing the telnet connection.
Use the following syntax to connect from a network terminal.
LAN (10M, 100M, 1000M Ethernet)
Syntax
Parameter(s)
The TCP port number setting can be changed using the port command.
SERVIS IP-Serial
32
1p Converter
User's Guide
Remote terminal
telnet <host_name> <TCP_port_number>
host_name = host name or IP address
TCP_port_number = corresponding port number (default setting)
that supports following connections
TCP port number
Connection
30003
Read/write port for the target port
30002
Write-only port for the target port
30001
Read-only port (1) for the target port
30000
Read-only port (2) for the target port
Refer to
4.1.17 port Command (page 70)
#3000x
Target device