Page 3
Table of contents Safety Information.....................3 How to Use.........................4 Assembling cleaner .......................4 Using the cleaning head and Accessory Nozzles..............6 Emptying the Dust Chamber ....................8 Operating the cleaner......................9 Cleaning the Filter ........................10 Cleaning the Exhaust Filter ....................11 Troubleshooting........................12...
If blockage or obstruction is located, remove and wait at least 30 minutes before attempting to use the cleaner. After the 30 minutes period, plug the cleaner back in and turn on the switch. If the cleaner still does not run, please contact your approved LG service centre.
Assembling Cleaner Fit the large cleaning head into the end of the tube. NT** Spring latch NE** Elbow HT** Telescopic tube HE** The 2 position head Telescopic tube (depending on model) (depending on model) Push telescoopic tube into • Press the spring latch to release. nozzle outlet.
Page 6
Head Flexible Hose HT** HE** NT** NE** Attachment Point Button Connecting the flexible hose • Push the end of the head on the flexible hose CAUTION into the attachment point on the vacuum cleaner. • To remove the flexible hose from the vacuum •...
User's Guide for Sani Punch Vacuum Nozzle (Option) How to use Features This nozzle picks up even dust inside through beating. Follow the directions below for proper use. The bottom part can be separated to be cleaned. Assembly Since the bottom does not stick to the surface, vacuuming is easy. Connect the nozzle to the telescopic tube.
Page 14
This Sani Punch nozzle is for effective cleaning of beds and blankets to remove mites and dust. Effective cleaning Bed & blanket Bulky & heavy blanket Light blanket & sheet When using on the bed When using on the floor Lay out the blanket and vacuum It is easier to clean a light blanket or sheet by it on the bed.
Page 15
User's Guide for Sani Punch Vacuum Nozzle Cleaning Vacuum Nozzle for Bedding (Option) For simple cleaning of the vacuum nozzle, detach the Sani Punch nozzle from the telescopic tube and attach the crevice tool to vacuum dust. Bottom Since the vibrator inside is composed of precision parts, never disassemble the body. Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle.
Page 16
Follow the instruction below for through washing. (Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction) Press the button on the Wipe all the soiled parts Wash the removed bottom rear side of the vacuum of the vacuum nozzle plate with water and dry it.
Troubleshooting What to Do If Your Vacuum Cleaner Does Not Work • Check that the vacuum cleaner is correctly plugged in correctly and that the electrical socket is working. What to Do When Suction Performance Decreases • Turn off the vacuum cleaner and unplug it. •...