Making A Connection To A Wap Service - Nokia TMR880 User Manual

Making a connection to a WAP service

Firstly, make sure that the service settings of the WAP service you want to use are
activated. To activate the settings:
• Press Menu and select
scroll to the set you want to activate and press Activate.
Secondly, make a connection to the WAP service. There are three ways to connect:
• Open the homepage of the WAP service:
Press Menu and select
Tip: To quickly open the homepage of a WAP service:
in standby mode, press and hold
Or
• Select a bookmark of the WAP service:
Press Menu, select Services, Bookmarks, and select a bookmark.
If the bookmark does not work with the current active service settings, activate
another set of service settings and try again.
Or
• Key in the address of the WAP service:
Press Menu and select
WAP service, press
Note that it is not necessary to add the prefix http:// in front of the address
since it will be added automatically.
Copyright © 2005 Nokia. All rights reserved.
Services and Settings. Select
Services and Home.
Services and Go to address. Key in the address of the
for special characters, and press OK.
Active service settings
.
and
117