Table of Contents
Advertisement
VIEWING MODE
General Information
The following describes the basic functions of your DMP while
watching satellite TV or listening to satellite radio.
Some of the functions described here are dependent on the
Service Provider and can only be used if they are included in
the transmitted programme information.
Please note, that during the Channel Search procedure, the DMP
may download a large number of channels. This may include
channels from various Service Providers, also those to which you
do not have access unless you have a Smartcard from one of
those Service Providers.
If you select a programme to which you do not have access, you
will get a message on the screen. This message may vary, de-
pending on Service Provider and used Smartcard.
While viewing, the current channel number will be shown on the
front panel display.
In addition to the normal functions like switching the DMP in/out
of standby, changing the volume etc. (ref. to the overview of the
remote control) there are some other useful functions which will
be explained in this part of the manual.
Programme Information
Every time you change channels you will receive programme in-
formation for a few seconds. (In the "User Preferences" menu
you can select how long this information will be shown.)
The information may include:
Current time.
Channel list.
Channel number and name.
Name of the current and next programme.
The start and total time of the current programme.
A bar, indicating the elapsed time of the current programme.
Recommended lowest age limit for watching the programme.
The start and total time of the next programme.
Programme information will only be available if it is included in
the transmission. Otherwise a "No information available" mes-
sage will be shown.
You may change channel lists with the
GB 14
Current
time
buttons.
Information
about the
Channel
current pro-
list
gramme
Information about
the next programme
Channel number
and name
Age limit
information
Advertisement
Table of Contents
