TV Timer Features
ON-TIMER with Alarm
This unit can be set to automatically power on in one of 2
modes (TV or Playback). Even if you set the On Timer, it
will not be performed during Play Lock mode. You can also
combine the On-Timer with a one minute alarm that
gradually increases in volume.
1
Press PROG
to display SET PROGRAM screen.
2
1)Press
SET PROGRAM
T I MER PROGRAMMING
2)Press
ON TIMER
SELECT :
SET
:
END
: PROG
3
1) Press
ON T I MER
6:--AM CH --
ALARM : ON
2) Press
SELE CT HOUR
SELECT :
SET
:
END
: PROG
• You can choose TV or PLAY for the On
Timer mode. (If TUNER:OFF, you can only
select PLAY.)
• Make sure a tape is inserted if Playback
mode is selected.
4
Press
ON T I MER
6:00AM CH08
ALARM "ON" or "OFF."
ALARM : ON
ABC
SELE CT ALARM
CANCEL : ADD / DLT
SELECT :
SET
:
END
: PROG
When "ON" is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use
and
to move back and correct.
5
Press PROG
to set ON TIMER.
• "ON TIMER SET" is displayed.
• ON TIMER Indicator lights up on the unit.
To Cancel ON-TIMER set,
repeat steps 1 and 2. Then, press ADD/DLT to
clear the time in step 3. Now, press PROG to end.
"ON TIMER END" briefly appears on-screen.
18
to select
"ON TIMER."
to display
ON TIMER screen.
to select
desired settings.
to set the
ON-TIMER TIME or
ON-TIMER mode.
to select
Note
• If no button on the remote or unit
Ready Checklist
The clock is set to correct time.
<Model AG-520E unit shown>
ON TIMER
Indicator
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.