LG LE1004 Use Manual page 32

A. CAMERA : select camera to setup PTZ.
B. DEVICE NAME : Select camera name.(Max 15 cameras supported)
1. LG Multix_E / LG Co.,Ltd
2. LG Multix / LG Co.,Ltd
3. LPT - A100L / LG Co.,Ltd
4. LVC-C100 / C200HM / LG Electric Inc
5. HSDN251 / Honeywell Co.,Ltd
6. MD200 / 2000 / 1200 / 800 / Sony Co.,Ltd
7. New Born / NEW BORN HIGHTECH
8. WVCS850 / Panasonic
9. PELCO-D / PELCO Co.,Ltd
10. PELCO-P / PELCO Co.,Ltd
11. SCC-641 / SCC-643 / SAMSUNG Co.,Ltd
12. SPD-2300 / 3000 / 3300 / SAMSUNG Co.,Ltd
13. SUNGJIN / SUNGJIN Co.,Ltd
14. TPD7720 / DYNACOLOR,INC
15.
V1305R-DC / V1300RB / CRX – 1013 / VICON
C. DEVICE ID : Select ID that configured in camera.
D. BPS : Bit rate Per Second for data transmission.
Default value of BPS is '9600'
※ Value can be selected by camera setting: (1200/ 2400/ 4800/ 9600/ 19200/
38400/ 57600/ 115200 bps)
E. DWELL TIME : This is time interval before moving to next preset position
when touring.
- Select one from 5 seconds, 10 seconds, 20 seconds, 30 seconds, 1
minute, 3 minutes and 5 minutes.
- The default is 1minute.
Notice
Basically, DVR support one RS-485 port for PTZ connection.
Chapter 2 Functional description
2-15