Watching External Inputs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input.
●
To connect the equipment
The remote control is capable of operating the contents or external equipment.
■
To return to TV
(p. 12 - 14, 93 - 95)
Turn the TV on
1
When connecting with SCART (p. 13)
Receives input signals automatically when playback starts
●
Input signals are automatically identified by the SCART (pin 8) terminal.
●
This function is also available for HDMI connections (p. 93).
If input mode is not switched automatically
Perform
and
●
Check the setup of the equipment.
Display the input selection menu
2
Select the input mode connected to the equipment
3
Input Selection
AV1
AV2
HDMI1
HDMI2
HDMI3
TV
SD Card/USB
●
You can also select the input using the AV button on the remote control or the TV
(except [SD Card/USB]).
Press the button repeatedly until the desired input is selected.
●
To switch between [COMPONENT] and [VIDEO] in [AV2], move the indicator by
pressing left and right cursor button.
●
[SD Card/USB]: Switches to Media Player.
●
You can label or skip each input mode (except [SD Card/USB]).
"Input Labels" (p. 44)
Skipped inputs will not be displayed when the AV button is pressed.
View
4
AV1
Displays the selected mode
Note
●
If the external equipment has an aspect adjustment function, set it to "16:9".
●
For details, read the manual of the equipment or ask your local dealer.
(p. 30)
select
watch
"Using Media Player" (p. 64)
29