Advertisement
D9131A
Event Description and Troubleshooting
Event
Trouble Door
Open
Trouble Report
Unverified
Event
User Alarm Cmd7
User Alarm Cmd9
Usr Code Change
Usr Code Delete
User Level Set
User Tamper
Walk End
Walk Start
Was Force Armed
Watch Mode Start
Watch Mode End
Watchdog Reset
* For an explanation of terms, see your Security System Owner's Manual.
© 2002 Bosch Security Systems
Description
Access door was left open beyond the programmed time.
Trouble condition at device specified.
The point specified generated an unverified alarm event.
User with reported ID manually initiated special alarm in the area specified.
User with reported ID manually initiated special alarm in the area specified.
User ID specified was changed.
User ID specified was deleted.
The authority level of the specified user has been modified.
User with wrong ID tried to access specified area.
Walk test in area specified is complete.
A walk test is in progress in the area specified.
User with the reported ID force armed* account with point(s) faulted.
The Watch Mode in the specified area has started.
The Watch Mode in the specified area has ended.
Panel was internally reset.
34584G
User's Guide
10/02
D9131A
Page 8 of 8
Advertisement
