Removing Packaging; For Convection Microwave; Preparing Oven - Bosch HBL33 Installation Manual

Removing Packaging
• Cut straps on outside of box.
• Remove cardboard box.
• Remove all top and side cardboard and Styrofoam braces.
• Place oven in front of cabinets where it is to be installed.
• Unscrew unit from Left and Right Brackets as show in "Left and Right
Packaging Bracket Removal."
Left and Right Packaging Bracket Removal
Note:
For Convection
Microwave Combination
Units
Different models use different packaging materials. Actual brackets may look
differently. Bracket remains in packaging base. Unit should stay on packaging base
until ready to be lifted into cabinet cutout.
Remove 2 rear support Convection Microwave Shipping Brackets prior to
installation as shown in "Convection Microwave Shipping Bracket Removal."
Convection Microwave Shipping Bracket Removal (for Convection Microwave Combination Units Only)
Preparing Oven
Place oven in front of cabinets where it is to be installed. Rest it on a jack or other
sturdy support so that it is in line with the cabinet cutout.
English 9