Haier HB500BSS User Manual page 8

English
5. Add the ingredients to be processed into the glass jar.
6. Put the cover with the measuring cup into the glass jar and press
down to secure.
7. The blender has 3 settings. Turn the power switch to the desired
setting or press the black button to pulse. Always hold the top of
the glass jar while blending.
Speed Setting
0 = Off
1 = Low
2 = High
Black Button = Pulse For crushing ice and solid foods in short,
Note: The pulse setting does not permanently engage in the pulse
Operate the blender for a maximum of 60 seconds at a time or
alternate 60 seconds on, then 60 seconds off to prevent
overheating or consequent damage to the blender. For continuous
blending action, set the power switch to either the Low or High
setting. For short bursts of high speed blending, use the Pulse
setting.
When crushing ice alone, add a small amount of water since ice
will not crush without some form of liquid. For best results, add
1/2 cup of water for every 1-1/2 cups of ice. Drain any excess
water after blending if only ice is required.
8. After using the blender, always move the switch back to the "0" off
setting and unplug the appliance from the outlet.
9. To remove the glass jar, simply lift it off the motor base. It is not
necessary to rotate the glass jar to remove it.
10. Always clean the jar assembly after each use.
7
Usage
For turning off the power
For light usage with liquids
For mixing liquids with solid foods
powerful bursts
setting. It will return to the off setting as soon as the button
is released. Either press and hold the button in the pulse
setting or press repeatedly.