Bosch Hob Installation Instructions Manual page 16

Connection for
liquefied gas (LPG)
Note
16
With liquefied gas (LPG), the gas connection must be
made via a flexible gas tube or a fixed tube.
Important information for the use of a flexible gas
tube:
A flexible security gas tube or a plastic tube with a
diameter of 8 or 10 mm must be used.
It must be secured to the gas connection with a
permissible connection device (e.g. hose clamp).
It must be short and fully leakproof. The tube can have
a maximum length of 1.5 m. Observe current
requirements.
It must be replaced once a year.
d
Observe the country specific requirements.
1. Insert the new seal into the connecting piece. The
seal must sit correctly.
2. Screw in the connecting piece (SW24) to the gas
connection (SW22).
3. Insert the flexible security gas tube and tighten
securely with the screw thread or suitable hose
clamp.
4. Carry out a leak test, see the "Leak test" section.
Open the locking device for the gas connection.