2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information Select and start a washing programme Product description Control panel Washing programmes Use of the appliance Care and cleaning Setting the water softener What to do if… Use of dishwasher salt Technical data Use of rinse aid...
electrolux 3 • Keep all detergents in a safe area. Do not • Do not use the appliance: let children touch the detergents. – if the mains cable or water hoses are • Keep children away from the appliance damaged, when the door is open.
4 electrolux CONTROL PANEL 3 4 5 Programme guide Programme knob Start/cancel button (Start Cancel) Multitab button (Multitab) Delay start button (Delay) Digital display Indicator lights Programme marker Off position Indicator lights Wash phase Comes on when the washing phase or the rinsing phase operates. Dry phase Comes on when the drying phase operates.
electrolux 5 – To set the water softener. Refer to 'Set- • Adjusted level of the water softener. ting the water softener'. • Activation/deactivation of the rinse aid – To deactivate/activate the rinse aid dis- dispenser (only with multitab function on). penser.
6 electrolux Water hardness is measured in equivalent • Clarke. scales: Adjust the water softener to the water hard- • German degrees (dH°). ness in your area. If necessary, contact • French degrees (°TH). your local water authority. • mmol/l (millimol per litre - international unit for the hardness of water).
electrolux 7 Do these steps to fill the salt container: 4. Remove the salt around the opening of 1. Turn the cap anticlockwise to open the the salt container. salt container. 5. Turn the cap clockwise to close the salt 2.
8 electrolux 2. Fill the rinse aid dispenser with rinse You can set the rinse aid dosage between aid. The mark 'max.' shows the maxi- position 1 (lowest dosage) and position 6 mum level. (highest dosage). 3. Remove the spilled rinse aid with an 1.
Page 9
electrolux 9 Mix spoons with other cutlery to prevent them to bond together. Use the cutlery grid. If the dimensions of the cutlery prevent the use of the cutlery grid, you can remove it. Upper basket The upper basket is for plates (maximum The rows of prongs in the lower basket can 24 cm in diameter), saucers, salad bowls, be flat to load pots, pans and bowls.
10 electrolux 2. Carefully lift the two sides until the mechanism is engaged and the basket is stable. Adjustment of the height of the upper basket If you put large plates in the lower basket, Do these steps to move the upper basket first move the upper basket to the upper to the lower position: position.
electrolux 11 3. If you use a washing programme with 5. Close the lid of the detergent dispens- prewash phase, put more detergent in er. Press the lid until it locks into posi- the prewash detergent compartment tion. (B). Different brands of detergent dissolve in different times.
12 electrolux To activate the multitab function: 2. The digital display shows the current • Press the multitab button. The multitab setting for the rinse aid dispenser. indicator light comes on. Rinse aid dispenser To deactivate the multitab function: deactivated •...
electrolux 13 Setting and starting a washing 2. Press the start/cancel button to start programme with delay start the washing programme. 1. Set a washing programme. End of the washing programme 2. Press the delay start button until the Switch off the appliance in these condi- display shows the necessary delay start tions: time for the washing programme.
14 electrolux Programme Degree of soil Type of load Programme description and pro- gramme knob position Normal soil Crockery and cutlery Prewash Main wash up to 50°C 1 intermediate rinse Final rinse Drying Partial load (to be 1 cold rinse (to prevent food completed later in the scraps to bond).
electrolux 15 3. To unlock the filter system, turn the 12. To lock the filter system, turn the han- handle on the microfilter (B) approxi- dle on the microfilter (B) clockwise until mately 1/4 anticlockwise. it lock in position. 4. Remove the filter system. 13.
Page 16
16 electrolux Fault code and malfunction Possible cause and solution • the digital display shows • The water tap is blocked or furred with limescale. Clean the water tap. The dishwasher does not fill with • The water tap is closed. water Open the water tap.
electrolux 17 The cleaning results are not satisfactory Dry water drop signs on • Increase rinse aid dosage. glasses and dishes • The detergent can be the cause. TECHNICAL DATA Dimensions Width cm Height cm Depth cm Electrical connection - Voltage - Information on the electrical connection is given on the rating Overall power - Fuse plate on the inner edge of the dishwasher door.
18 electrolux If a repair is necessary, the appliance must of the appliance is correct, the door does be easily accessible for the engineer. Install not catch on the sides of the cabinet. If the the appliance worktop to the appliance if door does not close correctly, loosen or you want to use the dishwasher as a free- tighten the adjustable feet until the appli-...
electrolux 19 Remove the sink plug when the appliance The appliance has a security feature to drains the water to prevent that the water prevent that dirty water goes back into goes back into the appliance. the appliance. If, the spigot of the sink A drain hose extension must not be longer has a 'non-return valve', this valve can than 2 m.
Page 20
20 electrolux Warning! To discard the appliance, • Discard the door catch. This pre- follow the procedure: vents the children to close them- • Pull the mains plug out of the socket. selves inside the appliance and en- • Cut off the mains cable and mains danger their lives.