Connecting Two Vcrs For Copying Tapes - GE VG2053/VG4053 User Manual

Hooking Up the VCR

Connecting Two VCRs for Copying Tapes

Option A hookup.
Use this hookup for a simple connection
which requires fewer accessories.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Set the CH3 CH4 switch on the playback
VCR to either channel 3 or 4.
Tune the recording VCR to this channel to
receive the signal from the playback VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
5. Continue to page 8.
Option B hookup.
Use this hookup for slightly improved copy
quality and more convenient operation —
use of the TV•VCR button is not required.
1. Select a hookup from pages 2 through 5
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
If your other VCR is not stereo, you may need a
Y-adapter to hear sound from both channels.
3. Plug in power cords of VCRs and TV.
Continue to page 8.
4.
Select the line (audio/video) input (L) on the
recording VCR to receive the signal from the
playback VCR.
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.
6
A
Playback VCR
From Antenna, Cable
or Cable Box
VIDEO
Recording VCR
VIDEO
Audio/Video
Cables
B
VIDEO
Playback VCR (only)
VIDEO
Recording VCR
Audio/Video
Cables
ANT IN
AUDIO
IN
RF OUT
OUT
CH 3 CH 4
RF Coaxial Cable
(supplied)
ANT IN
AUDIO
IN
RF OUT
OUT
3 CH. 4
RF Coaxial
Cable
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
ANT IN
AUDIO
IN
RF OUT
OUT
CH 3 CH 4
Audio/Video
Cables
ANT IN
AUDIO
IN
RF OUT
OUT
CH 3 CH 4
RF Coaxial Cable
or
(supplied)
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
From Antenna, Cable
or Cable Box