NurseCall Relay Unit
4
Programming
4.1
Generalities
4.1.1
Using the keyboard
4.1.2
Exit and cancel entries
4.1.3
Key not allowed
4.1.4
Locking and unlocking the keyboard
This function locks only the keyboard to prevent any false manipulation. The colored buttons
on the left hand side are still available.
When the keyboard is locked, a small lock appears at the bottom right of the display:
DATE:
TIME:
4.1.5
Programming time-out
Bosch Security Systems
Open the cover carefully and use the keyboard.
To access the special settings programming, press
See Section 4.3 Special settings, page 21 for more details.
Press
once or several times.
If you have pressed a key by mistake during the programming, a high-pitched beep is
generated.
Press
then
within one second to lock or unlock the keyboard.
03.01.12
12:12:31
Programming of the NurseCall Relay Unit terminates automatically if no entries are made
on the keyboard for more than one minute.
¨
½A
User Manual
Programming | en
three times quickly.
F.01U.252.722 | V1 | 2011.12
19