Manageable 8/9-Port Switch
FRONT PANEL DISPLAY
(D-GES7600-MM-S Shown)
10/100TX Port Status
1000FX Port Status
Power Indicator
Optical Status
1. Power Indicator
This LED comes on when the switch is properly connected to power.
2. Optical Status LED's (FX)
The ACT LED's come on when data is present.
(LED will flash at the rate data is transferred).
The LNK LED's will be on for 100FX speed transmission.
3. 10/100/1000TX Port Status LED's
The LED's are located at each port, displaying status.
Please refer to the Table for more details.
LED
State
Indication
A valid network connection established
GREEN
Steady
Flashing
Data transfer
YELLOW
User's Manual
3