Removing Liquid End; Liquid End Removed - GE OSMONICS TONKAFLO QS1800V Series Installation, Operation And Maintenance Manual

Pull Liquid End
Straight Out
Figure 6.9

Removing Liquid End

(QS2825V Shown)
To separate the liquid end from the motor module, simply remove the four bolts joining the
two together (Figure 6.8, Liquid End and Motor Module) and carefully pull them apart (Figure
6.10, Liquid End Removal). To rejoin the liquid end to the motor module, use the following pro-
cedure: (Figures 6.9 and 6.10 detail the components and assembly).
STEPS
1. Lubricate the O-ring with petroleum or silicone grease
2. Align the splines on the liquid end coupling to the splines on the motor, and join
together using the four cap screws and lock washers. Do not over-tighten.
Liquid End Removal
(QS2825V Shown)
21
Motor Module
Liquid End
Figure 6.10