Andset; Base Station - GE Skype 810 User Manual

Base Station

1. Choose an area near an electrical outlet and a telephone wall
jack (RJ11C), and place your base/gateway on a level surface
near your high speed internet connection.
NOTE: If your computer or other equipment is
occupying all available internet connections you
will need to purchase a router.
. Plug one end of the telephone line cord into the
on the back of the base/gateway and the other end into a
modular jack.
NOTE: Landline connection is not necessary for
Skype usage.
IMPORTANT NOTE: Emergency calls via the
landline are only possible if power is applied
to the base station and the landline is properly
connected.
. Connect the ethernet cable to the
gateway and to your internet connection.
. Plug the AC power converter into the electrical outlet and the
DC connector into the jack on the back of the base/gateway.
CAUTION: Use only the SALOM Model SSW-
1328US power adaptor that came with this
unit. Using other power adaptors may damage
the unit. This power adaptor is intended to
be correctly orientated in a vertical or floor
mount position.
jack in the base/
1
jack