Installation; Setting Up - Bosch UFLED Installation Manual

AEGIS UFLED
3

Installation

3.1

Setting up

Set up the unit correctly to obtain the best performance.
Optimum results are achieved by setting up at night and
viewing the results on a monitor. Use the illustration below to
assist with installation.
Figure 3.1 Installing an AEGIS UFLED lamp
1 Nearest point
2 Furthest object
CAUTION!
When the unit has been operating for a while it becomes hot.
Switch off the illuminator and allow it to cool for a minimum of
10 minutes before touching.
Do not look directly into the unit at a distance of less than
1.7 m.
Bosch Security Systems Installation Manual
Installation | en
F.01U.123.987 | 1.0 | 2010.04
15