Bosch Intuikey Keyboard User Interface - Bosch VMS Operator's Manual

56 en | Using a CCTV keyboard
Enter a number and confirm with OK to display the respective camera in the selected Image
pane.
11.2

Bosch IntuiKey keyboard user interface

Notice!
Every input on the keyboard is cleared after some seconds if no further input is made.
This chapter describes the user interface of the Bosch IntuiKey keyboard.
The following illustration shows the various interface elements of the keyboard:
1
2
2013.07 | V1 | Operator Client
1
1
Softkeys and softkey display
Status display
2
MON CAM
1 1
D1
DSrv 1 Srv 1
Prod Mon
Clr Shot
1 2 3
4 5 6
7 8 9
0
4
Allow you to use a fixed set of commands or to
control the Logical Tree. The commands
displayed in the softkey display change
depending on the operation mode.
Changes dynamically and displays information on
the current operation mode.
Operator's Manual
Bosch Video Management System
3
Bosch Sicherheitssysteme GmbH