Locking The Control Of A Ptz Camera; Updating The Reference Image; Window - Bosch MBV-BPRO-40 Operator's Manual

Video management system
Table of Contents

Advertisement

18
en | Displaying camera images
To use Intercom functionality on your workstation your user group must be granted to use it.
You perform this task in Configuration Client.
In the Options dialog box, you can configure half duplex or full duplex mode.
To use Intercom functionality:
1.
2.
3.
Notice!
i
An incoming auto pop-up alarm can interrupt the transfer.
5.21

Locking the control of a PTZ camera

Main window >
You can lock the control of a PTZ camera for other users. A user with a higher priority can take
over the control and lock the camera control. A timeout can be configured for this explicit PTZ
locking. If you only take over the control without manually locking it before, the control is
locked for the user with lower priority for 5 seconds.
To lock a PTZ control:
1.
2.
5.22

Updating the reference image

Main window >
You can update the reference image.
To update the reference image:
1.
2.
2012.07 | V1 | Operation Client
Select an Image pane with an audio encoder.
Click
and hold the mouse button. If audio was off for this Image pane, it is switched
on automatically.
The icon changes to
Now you can talk. If configured, the other side can talk also, regardless whether the icon
is clicked or not.
Release the mouse button. The transfer is interrupted.
Audio remains on for this Image pane.
Select one of the following items:
Image pane with PTZ camera
PTZ camera in the Logical Tree
PTZ camera in the Favorites Tree
PTZ camera in the Map window
Right-click the Image pane or the PTZ camera and click Lock.
The users with lower priorities cannot use the PTZ control any longer. On their displays a
corresponding message box is displayed.
To stop the locking of the PTZ control, right-click the Image pane or the PTZ camera and
click Unlock.
The locking ends automatically after a configured time period or when you log off.
Right-click an Image pane and click Reference Image....
The Reference Image dialog box is displayed.
Click Update.
The image of the time when you click Update is displayed.
.
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH

Advertisement

Table of Contents
loading

Table of Contents