Backup Region Assignment Dialog Box - GE v6 User Manual

In the event of a system failure, the micros associated with the failed client must have available telephone
numbers to reach the backup client. Click to display an
Redundancy
Display Redundancy Notification:
By default, this check box is checked. If licensed for Client Redundancy, this check box must be selected
to generate a notification message, that will display at all clients (based on facilities available to the
current operator), when:
A client failure occurs.
A device takeover succeeded.
A device takeover did not succeed. [Select Details button for explanation.]
(If the first-in-line backup client is not available, a second backup client will take over control
of devices and a notification message displays, updating you.)
Recovery of the default client and transfer of devices failed. [Select Details button for
explanation.]
Recovery succeeded.
If you clear this check box, you will not receive a notification message; however, indication of a take over
displays on the Client Monitor Form.
Perform Backup on Normal Shutdown: This check box is unchecked or clear by default. Select this
check box to trigger the takeover, by a specified backup client, of devices associated with a client during
a normal shut down.
If your system is not licensed and you are operating in demo mode, this option is not available for
selection.

Backup Region Assignment Dialog Box

A list displays, of available backup Regional Database Server computers.
Select one or more computer names from the available list and then click the right arrow to
assign.
Select one or more computer names from the assigned list and then click the left arrow to
unassign.
Click OK to accept the selections and close this window.
Secure Perfect 6.1.1 User Manual
Assign Micro Phone Numbers dialog box.
111