This document is written to be used with the BL-PA100KTA, which is a pre-configured set of 2 adaptors. Getting Started No settings are required to use these adaptors. Simply follow the instructions provided in this document. Refer to the included Operating Instructions for safety, HD-PLC Ethernet Adaptor reconfiguration, and troubleshooting information.
Page 2
Installation Connect the master adaptor (indicated by the Connect the master adaptor to a network device "MASTER" seal) to the wall outlet using the using a LAN cable (sold separately). We included AC cord. recommend connecting the master to your router. Router Connect the terminal adaptor to the wall outlet Connect the terminal adaptor to a network...