Electrolux Air Conditioner User Manual page 7

SELECTOR
SELECTOR
OFF
HIGH
COOL
MED
COOL
LOW
COOL
When turning the SELECTOR knob from "LOW COOL" to "HIGH COOL", keep
your speed as slow as possible. Do not change the operation mode between
"LOW COOL" and "HIGH COOL" too often.
THERMOSTAT
THERMOSTAT
6
5
4
3
2
1 11
HIGH
FAN
LOW
FAN
The thermostat automatically starts and stops the
running of the compressor in the air conditioner in order
to control
7
temperature. When the room temperature reaches the
8
desired setting, cooling will automatically stop. When
9 the room temperature rises above, cooling resumes.
This results in efficient use of power and economical
10
cooling.
The operating method is as follows: turn along the
arrow, the temperature setting becomes lower. When
you feel it is too cool, rotate the knob to the original
direction. When you feel it is too hot, rotate the knob
to the "COOLER" direction.
To set desired cooling temperature, simply rotate
the SELECTOR knob to the appropriate setting.
"HIGH FAN" will circulate the air at a maximum
speed without cooling.
"MED FAN" will circulate the air at a middle speed
without cooling.
"HIGH FAN" provides cooling automatically with
maximum air circulation.
"MED COOL" provides cooling automatically with
middle air circulation.
"LOW COOL" provides cooling automatically with
minimum air circulation.
"OFF" will completely shut off the unit.
Note
and maintain
5
a comfortable room