DINION 5000 AN
3
Installation
3.1
Unpacking
Unpack carefully and handle the equipment with care.
The packaging contains:
–
–
–
–
–
–
–
If equipment has been damaged during shipment, repack it in
the original packaging and notify the shipping agent or supplier.
WARNING!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code
NEC800 (CEC Section 60) or applicable local codes.
CAUTION!
The camera module is a sensitive device and must be handled
carefully.
Bosch Security Systems
DINION 5000 camera
CCD protection cap (mounted on camera)
Alarm I/O connector
Power connector
Important safety instructions
Quick install instructions
CD-ROM
–
Installation instructions
Installation Manual
Installation | en
AM18-Q0644 | v1.0 | 2013.03
11