Advertisement
Built-in units
RAG13 Stamped Aluminum Exterior Grille "J" Series
Used to replace exterior grille on old "J" wall case to maximize
efficiency and capacity of new chassis. The grille is included
with new wall cases RAB46, 47, or 48.
RAG14E Architectural Louvered Exterior Grille
for "J" Series
Extruded aluminum grille for application with RAB46, 47, or 48.
NOTE: The RAG14E exterior grille is NOT compatible with the
RAD4A1 EXTERNAL drain tube. Use of this grille would require
the use of the INTERNAL TUBE configuration to drain the unit.
RAF622 Replacement Room Front
for Rounded Front "J" Chassis
Used as replacement grille for rounded front "J" chassis units.
(Not for use with high mount units.)
RAF622A Replacement Room Front
for Rounded Front "J" Chassis
• Replacement Room Front for "J" series chassis with Oval
Control Knob opening.
• Not for use on High Mount Models.
RAK690 Architectural Louver Grille Adapter
for "J" Chassis Units
Permits most existing architectural louvered grilles to be used
with sloped front or rounded front "J" chassis units. Kit consists
of two wire mesh screen sections, clips to attach screen to
existing wall case, and two aluminum air deflectors to be
mounted to new chassis.
17
Advertisement
