How To Use; How To Switch On - Miele KM 2030 Instructions For Installation And Use Manual

Use the control knob to ignite the
burner and adjust the size of the flame.
Off Gas supply is off
strong flame
&
/ weak flame
To turn the burner on, press and turn
the knob toward the LEFT only. To
turn the burner off, turn the knob to
the RIGHT only.
Parts of the appliance can be
damaged if you:
- turn the knob without pressing,
- turn to the right to turn on,
- turn to the left to turn off.
The manufacturer will not be held
liable for such damages.

How to switch on

,
Do not leave the appliance
unattended whilst it is being used.
^ To ignite a burner, press the proper
control knob and turn it to the LEFT,
all the way to the largest flame
symbol.
^ Once a flame is visible, continue to
press the control knob for 8 - 10
seconds, then let go.
^ If the flame goes out turn the control
to "Off" and wait for at least 1 minute
before trying to ignite it again. If
necessary keep the control pressed
in for longer.
^ If the burner does not ignite after a
second attempt turn the control back
to "Off" and go to the "Problem
solving guide" for advice.
How to switch on during a power
outage
If there is a power outage, the burners
can be lit with matches or a stove
lighter.
^ To ignite a burner, press the control
knob and turn it to the LEFT, all the
way to the largest flame symbol.
^ Pressing down the knob, bring a lit
match to the gas/air mixture.
^ Continue to hold down the knob for
approx. 8-10 seconds, then let go.

How to use

15