Displaying Azimuth, Elevation, And Compass Headings - Bosch MIC612 Installation Manual

MIC612 Thermal Camera
CAUTION!
Bosch recommends that only the installer calibrate the Azimuth Zero point. A recalibration to
the Azimuth Zero point may cause inaccurate compass headings.
10.5.2

Displaying Azimuth, Elevation, and Compass Headings

You can display only the azimuth/elevation readings or only the compass reading, or you can
display both readings at the same time. The MIC612 displays the azimuth/elevation readings
and the compass heading in the following way:
180 / –45 S
where:
–
–
–
1.
2.
3.
4.
Bosch Security Systems, Inc.
180 is the Azimuth or the pan location in degrees.
–45 is the Elevation or the tilt location in degrees.
S is the compass direction (cardinal or intercardinal).
Press ON-95-ENTER to display the azimuth/elevation reading.
Press ON-96-ENTER to display the compass heading.
Press OFF-95-ENTER to hide the azimuth/elevation reading.
Press OFF-96-ENTER to hide the compass heading.
Installation Manual
Advanced Features | en 65
F.01U.249.416 | 2.0 | 2012.09