Fujitsu LifeBook S Series BIOS Guide LifeBook S Series Model: S6520 Document Date: 07/07/2008 Document Part Number: FPC58-1918-01 F U J I T S U C O M P U T E R S Y S T E M S C O R P O R AT I O N...
TrustedCore Menu, as detailed in the next section): 1. Turn on or restart your notebook. 2. Press [F2] once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility with the current settings displayed.
Page 3
severe, it will give you an opportunity to modify the setup utility settings, as described in the following steps: 1. When you turn on or restart the computer there is a beep and/or the following message appears on the screen: Error message - please run SETUP program Press <F1>...
3072 KB those fields. These fields are for information purposes only, and cannot be modified by the user. Phoenix SecureCore(tm) Setup Utility Advanced Security LifeBook S6520 Not defined 1.1X (XX/XX/2008) Intel(R) Core(TM)2 Duo CPU 3072 KB 2048 MB 1024 MB DDR3 SDRAM...
–— the field’s function and any special information needed to help understand the field’s use. Phoenix SecureCore(tm) Setup Utility Advanced Security Boot [14:57:01] [07/07/2008] [FUJITSU MHY2200BH] [MATSHITADVD-RAM UJ862BJ] [English (US)] -/Space Change Values Enter Select Sub-Menu Figure 2. System Menu...
Page 6
L i f e B o o k S S e r i e s B I O S Table 2: Fields, Options and Defaults for the System Menu Note that the parameters listed in the following table may vary depending upon your system’s configuration. Menu Field Options Drive0:...
Drive0 Submenu of the System Menu The Drive0 submenu identifies what ATA devices are installed. Info System Drive0 [FUJITSU MHY2200BH] Drive0: Type: Model: Capacity: Help Exit Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu...
L i f e B o o k S S e r i e s B I O S Drive1 Submenu of the System Menu The Drive1 submenu allows you to configure secondary ATA devices. Info System Drive1 [MATSHITADVD-RAM UJ862BJ] Drive1: [Enabled] Type:...
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: Set the I/O addresses for the serial and parallel ports. Set the keyboard and mouse features. Select between the display panel and an external display. Enable or disable the SATA, Modem, LAN, and Wire- less LAN controllers.
Page 10
L i f e B o o k S S e r i e s B I O S Table 5: Fields, Options and Defaults for the Advanced Menu Menu Field Description CPU Features When selected, opens the CPU Features submenu to allow you to change the CPU speed for battery life optimization.
Page 11
Serial/Parallel Port Configuration Submenu of the Advanced Menu The Serial/Parallel Port Configuration submenu lets you set the I/O addresses and interrupt levels for the serial, infrared and parallel ports of your notebook. I/O addresses, DMA channels and Interrupt levels can be entered in various ways, including via the BIOS setup utility, the control software for the I/O device, or the hardware.
L i f e B o o k S S e r i e s B I O S Table 6: Fields, Options and Defaults for the Serial/Parallel Port Configuration Submenu of Advanced Menu Menu Field Options Serial Port: Disabled Enabled Auto Base I/O Address/IRQ:...
Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard. Info System Keyboard/Mouse Features Numlock: Hot Plug: Internal Pointing Device: Initialization on Resume: [Fast] Help Exit Table 7: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu Menu Field Options...
L i f e B o o k S S e r i e s B I O S Video Features Submenu of the Advanced Menu The Video Features submenu is for setting the display parameters. Info System Display: Help Exit Table 8: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu Menu Field...
Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to enable or disable SATA, Bluetooth, LAN and Wireless LAN Controllers. Info System Internal Device Configurations Serial ATA Controller: AHCI Configuration: Bluetooth(R): LAN Controller: Wireless LAN Controller: IEEE1394 Controller: Internal Camera:...
L i f e B o o k S S e r i e s B I O S CPU Features Submenu of the Advanced Menu The CPU Features submenu provides options for configuring the Intel Core Multi-Processing and SpeedStep power management features of the CPU.
USB Features Submenu of the Advanced Menu The USB Features submenu provides options for enabling or disabling the USB devices. Info System Legacy USB Support SCSI SubClass Support: Help Exit Table 11: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu Menu Field Options Legacy USB Support:...
L i f e B o o k S S e r i e s B I O S Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the Wake Up On LAN feature, and setting the volume and video memory size.
Page 19
Table 12: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of the Advanced Menu Menu Field Options Volume Setting: Minimum Middle Maximum Hardware Power Disabled Management: Enabled Low Power Mode: Disabled Enabled FAN Control: Normal Silent Default Description [Middle] Selects the initial volume setting for the system.
L i f e B o o k S S e r i e s B I O S Event Logging Submenu of the Advanced Menu The Event Logging submenu configures event logging features for DMI events. Info System Event Log Capacity: Event Log Validity: View Event Log: Event Logging:...
Remember your passwords! If you set and forget your User and Master hard disk passwords, Fujitsu Computer Systems will not be able to reset it. You may lose data and have to replace your system board or hard disk drive.
L i f e B o o k S S e r i e s B I O S Table 14: Fields, Options and Defaults for the Security Menu Menu Field Options Supervisor –— Password is: User Password is: –— Set Supervisor –—...
Hard Disk Security Submenu of the Security Menu The Hard Disk Security submenu is for configuring hard disk security features. Info System Drive0: Set Master Password Set User Password Password Entry on Boot: *Hard Disk Password cannot be set or changed if the system is rebooted from OS.
L i f e B o o k S S e r i e s B I O S Owner Information Submenu of the Security Menu The Owner Information submenu is for setting owner information. Note that the owner information cannot be set without having entered a Supervisor Password.
TPM (Security Chip) Setting Submenu of the Security Menu The Trusted Platform Module (TPM) Security Chip Setting submenu is used to enable or disabled the embedded secu- rity chip. Main Advanced TPM (Security Chip) Setting Security Chip: Current TPM State: Change TPM State: Clear Security Chip: Help...
Figure 18. Boot Menu Default Description [Disabled] Turns on and off display of test results instead of Fujitsu logo screen during Power On Self Test. [Enabled] When Disabled, the Boot Menu is disabled and the [F12] key is ignored. When Enabled, the Boot Menu is enabled.
Info Boot priority order: Floppy Disk Drive Drive0 HDD: FUJITSU MHY2200BH CD/DVD Drive NETWORK: Marvell LAN Excluded from boot order: USB MEMORY: None...
L i f e B o o k S S e r i e s B I O S EXIT MENU – LEAVING THE SETUP UTILITY The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to make any changes.