Overlaying Points Of Interest On The Map - Pioneer AVIC-505 Owner's Manual

Overlaying points of interest on the map

You can overlay points of interest of a specified category on the map using voice commands.
If accepted, the command appears on the display.
• If the command displayed is not the one you gave, press the
until the desired command is shown (see "Using Voice Operation" above).
After all the countdown lamps have changed colour, a list of the most useful point of interest
categories appears.
You are asked "Please request a point of interest category."
• If you already know the category you want to overlay, say it while the Voice Recognition menu is
displayed. If accepted, the command appears on the display. Switch to the map to see the specified
point of interest category overlaid on the map.
If accepted, the command is repeated on the display. After all the countdown lamps have
changed colour, the map display then appears with an overlay of the selected point of interest
category.
• If the command displayed is not the one you gave, press the
until the desired command is shown (see "Using Voice Operation" above).
(NEXT OPTION) button repeatedly
C
(NEXT OPTION) button repeatedly
C