Panasonic EASA-PHONE KX-T123211D Installation Manual page 93

Carriage return for a new line
A new line code indicates what type of code is
needed for the print head on a printer to move the
first character position on the next line.
when " CR+LF" is required from
when " CR" is required from a printer.
CR=Carriage Return
LF=Line Feed.
Baud rate
A baud rate code indicates the data transmission
speed from the system to a printer.
Parity
1lOB
150B
300 B
600 B
1200 B
2400 B
4800 B
9600 B
when 110 baud is required.
when 150 baud is required.
when 300 baud is required.
when 600 baud is required.
when 1200 baud is required.
when 2400 baud is required.
when 4800 baud is required.
when 9600 baud is required.
A parity code indicates what type of parity is used
to detect an error in a string of bits composing a
character.
None
Mark
Space
Even
Odd
when an error checking function is not
required from a printer.
when a Mark is required from a printer.
when a Space is required from a printer.
when an Even is required from a printer.
when an Odd is required from a printer.
Word length
-
A word length code indicates how many bits
compose a character.
7 bits when 7 bits are required.
8 bits
when 8 bits are required.
Stop bit length
A stop bit length code indicates the end of a bit
string which composes a character.
when one bit is required for end detection.
The default value is the same as that of the
Panasonic data terminal, KX-D4985, KX-D4910D,
KX-D4911, KX-D4920, etc, except baud rate.
r
%
8
F
E
z
3-33