Panasonic DP-2000 Operating Instructions Manual page 31

Programming or Retrieving Parameters via Email
After receiving the email message requesting the Internet Parameters, the DP-2000 sends back an email to the
address specified in the "From:" line with the Internet Parameters in the body of the email.
DP-2000 Internet Parameters Email Sample
(1) To
From
Subject
(2) @sender to @end
(3) @select-domain to @end
(4) @relay-domain to @end
(5) @system to @end
(1)
(3)
(4)
: Your email address that was used to retrieve the Internet Parameters.
: The DP-2000's email address.
: DP-2000 System Parameter List
: Defines up to 24 User Names and their Email Addresses programmed in the DP-2000 for
the Sender Selection in section (2) between @sender to @end block.
: Defines up to 10 alternate Domain Names programmed in the DP-2000 for the Selectable
Domains in section (3) between @select-domain to @end block.
: Defines up to 10 Domain Names programmed in the DP-2000 that have been authorized
to access your Internet Fax for Relayed XMT Request in section (4) between @relay-
domain to @end block.
: Defines the following Internet Parameters programmed in the DP-2000 in section (5)
between @system to @end block.
(a) Default Domain
(b) Manager's Email Address
(c) Relay XMT Password
(d) Remote Password
INSTALLING YOUR MACHINE
(2)
(5)
31