System Speed Dialing Number Set - Panasonic KX-TD308 User Manual

3.2 User Programming (Manager Programming)
Description
Selection
Default
Programming
Conditions

System Speed Dialing Number Set

Used to program the System Speed Dialing numbers. These numbers are
available to all extension users.
• Speed dial numbers: 00 through 99
• Telephone number: 24 digits (max.)
All speed dial numbers – Not stored
1. Enter 001.
Display: 001 SYS SPD DIAL
2. Press NEXT.
Display: SPD-Code?
3. Enter a speed dial number.
To enter speed dial number 00, you can also press NEXT.
Display example: 00:Not Stored
4. Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another speed dial number, press NEXT or PREV, or
SELECT and the desired speed dial number.
7. Repeat steps 4 through 6.
8. Press END.
• Each speed dial number has a maximum of 24 digits. The valid
characters are 0 through 9,
FLASH/RCL, PAUSE, SECRET and – (hyphen) buttons.
– To store the flash signal, press FLASH or FLASH/RCL.
Note : The stored flash will only be effective during an
– To store a hyphen, press the "–" button.
, and # keys, and the FLASH or
established call.
(Refer to the Installation Manual, Section 3 "External
Feature Access".)
User Programming (Manager Programming)
001
3-9