Forced Mode; Option Mode; Making A Call; Receiving A Call - Panasonic EASA-PHONE KX-T61610 Installation Manual

Description
This ~yeature gives each message of the SMDR
an account code of the called or calling party.
t
Station Message Detail Recording (SMDR)
is cbst saving feature that records all incom-
ing and outgoing calls through the CO line,
1
This feature has two modes "Forced" and
"Option".
In the "Force>" mode, the account code must
be entered every time the extension user dials.
In the "Option" mode, the account code may be
entered when a record of the account code is
needed.
When setting to the "Forced" mode, see page
3-34.
The'programmable feature (F3 only) button
of
the KX-T61650 oi: KX-T30850 cati also be used
for "Account Code" if programming is done
beforehand in. the KX-T61610.
For programming, see page 3-54.
Operation
Forced Mode
sl Making u Call
1.
Lift the handset or press the SP-PHONE
button.
2. Press the CO button.
The FWDIDND Indicator will flash.
3. Press the FWDIDND (or F3) button,
"ENTER ACCNT CODE" will be dis-
played. The FWDIDND Indicator will light.
Intermittent tone is heard.
4. Dial the account code.
Account code must be 4 digits.
CO dial tone_ will be heard.
5. Dial the phone number.
~You may dial '9 or 81 through 86 instead of
pressing the CO button.
- - --
4-26
--
lsl Receiving a call
If you want to record a calling party's account
code in the SMDR follow the below-mentioned
procedure.
_
Within 30 seconds of finishing your conversn-
tion .or while having a conversation,
The' FWDIDND Indicator will flash.
1. Press the FWDIDND (or F3) .button.
"ENTER Ai=CNT CODE" will be dis-
played. The FWDIDND Indicator will light.
2. Dial the account code.
Account code
must
be 4 digits.
@Dialing the account code must be done
before hanging up,
1
Option Mode
$IBI Making or Receiving a Call
'. If
you want to record a calling or,called party's
account code in the SMDR, follow the below-
mentioned procedure.
Within 30 seconds of finishing your conversa-
tion or while having a conversation,
1. Press the FWDIDND (or F3) button.
"ENTER ACCNT CODE" will be dis-
played. The FWDIDND Indicator will light.
2. Dial the account code.
Account code must be 4 digits.
eDialing the account code must be done
before hanging
~tp.
Conditions
*Account code must be required 4 numerical
digits except
for
the
q
and
q
buttons.
"If
you enter the wrong account code, press the
FWDIDND button and enter the correct code.
q
If
account codes are programmed with tele-
phone numbers
for
one touch dialing or
system speed dial&= you need not to dial an
account code when-mnking a call. Program
ns foH0 ws. _-.,~
.
- L